We specialize in hard to find items
All Categories
DAE MJ-75n NTEP NSF61 Lead Free Potable Water Meter, 3/4" NPT Couplings, Pulse Output, Gallon
Share Tweet
*Price and Stocks may change without prior notice
*Packaging of actual item may differ from photo shown
- Electrical items MAY be 110 volts.
- 7 Day Return Policy
- All products are genuine and original
- Cash On Delivery/Cash Upon Pickup Available
DAE MJ-75n NTEP NSF61 Lead Free Potable Water Features
-
Horizontal Inline mount with dial facing upwards. For installing vertically with water flowing upwards, please refer to DAE PD-75 (B08D36WZLM), which can be able to be installed in any position, vertically or horizontally, dial facing upwards or downwards or horizontally, water flowing downwards or upwards. Not for use of pit application. For outdoor use, please refer to DAE MJ-75c, PD-75.
-
National NTEP approval in accuracy, and repeatability as tested by Utah Water Research Lab. It applies to all the states including California who accepts both NTEP or CTEP. Certified by NSF to meet ANSI/NSF 61 for material safety and ANSI/NSF 372 for lead free plumbing as defined by the US Safe Drinking Water Act. Factory Calibration Certificates available. DAE Controls LLC is a Minority Business. Please feel free to get the NMSDC Minority Supplier Certificate from DAE Controls Website.
-
Cloud Metering available (2nd picture) with DAE CC2030 Gateway. CC2030 will collect water usage from DAE AMR (for 16 meters) or AMR130AN (for 1 meter) and send them to cloud server through Ethernet. With PC, cell phone, the landlords can see real time data, monthly water usage & billing reports to their tenants. If there is abnormal usage (ex. Broken piping), an email alert will be sent to your cell phone. No IT guy required. Just connect wires as per a simple picture (see video) & ready to go.
-
Ready for use with CO-10 (Electronic Pulse Counter) or CO-10 KIT - An inexpensive remote reading solution (6th picture). Can also use with DAE AMR130 (Auto Meter Reading Module for single water meter) and AMR (for 16 water meters) for remote reading (5th picture).
-
Accuracy: +/-1.5% within normal flow rate range as per AWWA Standard. Conforms to AWWA C708, for clean water. Safe Maximum Flow Rate: 20 GPM, Recommended Maximum Continuous Flow Rate: 10 GPM, Minimum Test Flow Rate: 0.25 GPM, Normal Test Flow Limits: 1-20 GPM
About DAE MJ-75n NTEP NSF61 Lead Free Potable Water
National NTEP approval, NSF61 Certified, Lead-Free Potable Water Meter, 3/4” NPT Couplings at both ends, with Pulse/Reed Switch Output, Multi-Jet.Model: DAE MJ-75nUnit: US GallonAccuracy: +/-1.5% within normal flow rate range as per AWWA StandardPulse Output: 1 gallon/pulse, a dry contact (i.e. no voltage) reed switch with 2 wires, 1.5m. The switch may be damaged if input electricity is more than 0.01A, 24V. We shall not be responsible with the result if connecting to third party device which is not certified by DAE.Meter body: NSF61 Certified Lead-Free Bronze.Item dimension: 7.5" length(with couplings: 11.5 inches), 3.7" wide, 4.23" height. Weight: 3 lbs 10 once.NSF61 Certified Lead Free Couplings IncludedMax. Reading:9,999,999 gallons, Min.Reading:0.005 gallons, The 1st digit from the right has a multiplier of 100 gallons. For example, if you see 01234 on the digits, it is 123400 gallons. The 1st dial under the digits has a multiplier of 10 gallons. The 2nd dial under the digits is in gallon.Max temperature: 122˚F (50˚C)Pressure drop: 0.580 psi @ 5 GPM, 1.960 psi @ 10 GPMConforms to AWWA C708, for clean water.Safe Maximum Flow Rate: 20 GPM, Recommended Maximum Continuous Flow Rate: 10 GPM, Minimum Test Flow Rate: 0.25 GPM, Normal Test Flow Limits: 1-20 GPMDAE MJ75 5/8"*3/4" meter is not a meter with a 5/8" inlet and a 3/4" outlet. It is with 3/4" NPT couplings for both 3/4" inlet and 3/4" outlet.The max. working pressure is 232 psi, exceeding the requirement from AWWA standard 150 psi.Bore diameter: 0.88 inch (22.3mm)For the buyers outside of USA, in addition to the tax, the carriers may charge brokerage fee.
