DAE MJ-75f NTEP NSF61 Non Lead Potable Water Meter, 3/4" NPT Couplings, Cubic Feet, Pulse Output

Pay with

DAE MJ-75f NTEP NSF61 Non Lead Potable Water Features

• Horizontal Inline mount with dial facing upwards. For installing vertically with water flowing upwards, please refer to DAE PD-75 (B08D36WZLM), which can be able to be installed in any position, vertically or horizontally, dial facing upwards or downwards or horizontally, water flowing downwards or upwards. Not for use of pit application. For outdoor use, please refer to DAE MJ-75c, PD-75.

• National NTEP approval in accuracy, and repeatability as tested by Utah Water Research Lab. It applies to all the states including California who accepts both NTEP or CTEP. Certified by NSF to meet ANSI/NSF 61 for material safety and ANSI/NSF 372 for lead free plumbing as defined by the US Safe Drinking Water Act. Factory Calibration Certificates available. DAE Controls LLC is a Minority Business. Please feel free to get the NMSDC Minority Supplier Certificate from DAE Controls Website.

• Cloud Metering available (2nd picture) with DAE CC2030 Gateway. CC2030 will collect water usage from DAE AMR (for 16 meters) or AMR130AN (for 1 meter) and send them to cloud server through Ethernet. With PC, cell phone, the landlords can see real time data, monthly water usage & billing reports to their tenants. If there is abnormal usage (ex. Broken piping), an email alert will be sent to your cell phone. No IT guy required. Just connect wires as per a simple picture (see video) & ready to go.

• Ready for use with CO-10 (Electronic Pulse Counter) or CO-10 KIT - An inexpensive remote reading solution (6th picture). Can also use with DAE AMR130 (Auto Meter Reading Module for single water meter) and AMR (for 16 water meters) for remote reading (5th picture). CO-10 or AMR130 will be purchased separately. Conforms to both AWWA C700 and ISO 4064 Class C. for City water only.

• Accuracy: +/-1.5% within normal flow rate range as per AWWA Standard. Conforms to ISO 4064, AWWA C708, for clean water only. Safe Maximum Flow Rate: 160.42 cu ft/h (20 GPM), Recommended Maximum Continuous Flow Rate: 80.21 cu ft/h (10 GPM), Minimum Test Flow Rate: 2.01 cu ft/h (0.25 GPM), Normal Test Flow Limits: 8.02 - 160.42 cu ft/h (1-20 GPM). DAE MJ-75f 5/8"*3/4" meter is not a meter with a 5/8" inlet and a 3/4" outlet. It is with 3/4" NPT couplings for both 3/4" inlet and 3/4" outlet.

About DAE MJ-75f NTEP NSF61 Non Lead Potable Water

Measured in cubic feet, National NTEP approval, NSF61 Certified, Lead-Free Potable Water Meter, 3/4″ NPT Couplings at both ends, with Pulse/Reed Switch Output, Multi-Jet.Unit: cubic feetAccuracy: +/-1.5% within normal flow rate range as per AWWA Standard0.01 cu ft/pulse, a dry contact (i.e. no voltage) reed switch with 2 wires, 1.5m. The switch may be damaged if input electricity is more than 0.01A, 24V. We shall not be responsible with the result if connecting to third party device which is not certified by DAE.Meter body: NSF61 Certified Lead-Free BronzeLength without couplings: 190 mm (7.5 inches), Length with couplings: 292 mm (11.5 inches)Dimension: 190 mm (7.5") length, 94 mm (3.7") wide, 107 mm (4.23") height. Weight: 1.65 kg (3 lbs 10 once)NSF61 Certified Lead Free Couplings IncludedMax Reading: 999,999.999 cu ft, Min Reading: 0.001 cu ft. The 1st digit from the right has a multiplier of 10 cu ft. For example, if you see 01234 on the digits, it is 12340 cu ft. The 1st dial under the digits is in cu ft . The 2nd dial under the digits has a multiplier of 0.1 cu ft. Reading on 4th picture of listing is 140.9734 cu ft.Max working pressure: 1.6 Mpa (232 psi), exceeding the requirement from AWWA standard 150 psi.Max temperature: 122˚F (50˚C)Pressure drop: 0.58 psi @ 40.1 cu ft/h (5 GPM), 1.96 psi @ 80.21 cu ft/h (10 GPM)Conforms to ISO 4064, AWWA C708, for clean water only.Safe Maximum Flow Rate: 160.42 cu ft/h (20 GPM), Recommended Maximum Continuous Flow Rate: 80.21 cu ft/h (10 GPM), Minimum Test Flow Rate: 2.01 cu ft/h (0.25 GPM), Normal Test Flow Limits: 8.02 - 160.42 cu ft/h (1-20 GPM)Bore diameter: 0.88 inch (22.3mm)For buyers outside of USA, in addition to the tax, the carriers may charge brokerage fee.