DAE MJ-100R 1" Lead Free Hot Potable Water Meter, Pulse Output + Couplings, Gallons

Pay with

About DAE MJ-100R 1" Lead Free Hot Potable Water

1" Lead Free Hot Potable Water Meter with Pulse Pulse/Reed Switch Output + Couplings, Multi-Jet Model: DAE MJ-100 Horizontal mount with dial facing upwards. For installing vertically with water flowing upwards, please refer to DAE V-100RP. Unit: Totalizer Measuring in Gallon Accuracy: +/-1.5% within normal flow rate range as per AWWA Standard Pulse Output: 1 gallon/pulse, a dry contact (i.e. no voltage) reed switch with 2 wires, 1.5m. The switch may be damaged if input electricity is more than 0.01A, 24V. We shall not be responsible with the result if connecting to third party device which is not certified by DAE. Meter body: Lead-Free Bronze Length without couplings: 10.24 inches, Length with couplings: 15.12 inches Item dimension: 10.24" length, 3.86" wide, 4.63" height. Weight: 5 lbs 11 once. NSF61 Certified Lead Free Couplings Included Max. Reading:9,999,999 gallons, Min.Reading:0.005 gallons, The 1st digit from the right has a multiplier of 100 gallons. For example, if you see 01234 on the digits, it is 123400 gallons. The 1st dial under the digits has a multiplier of 10 gallons. The 2nd dial under the digits is in gallon. Reading on 4th picture of listing is 55.818 gallons Only two wire connection between water meter and AMR or AMR130. It is not required for additional power source. Max temperature: 194˚F (90˚C) Pressure drop: 0.145 psi @ 5 GPM, 1.380 psi @ 15 GPM, 3.480 psi @ 25 GPM Conforms to AWWA C708 and ISO 4064, for clean water only. Safe Maximum Flow Rate: 50 GPM, Recommended Maximum Continuous Flow Rate: 25 GPM, Minimum Test Flow Rate: 0.75 GPM Normal Test Flow Limits: 3-50 GPM The max. working pressure is 232 psi, exceeding the requirement from AWWA standard 150 psi. Bore diameter: 1.14 inch (29mm)