We specialize in hard to find items
All Categories
Reboot 150A Mig Welder Flux Core Welder 220V Gasless Gas Stick 3 in 1 Wire Automatic Feed Portable welding machine IGBT Inverter Welder
Share Tweet
of brand new stock?
or
Need this item ASAP?
Check if this is available on Amazon
or available in other sites
Send us the link so we can buy for you
Reboot 150A Mig Welder Flux Core Welder 220V Features
-
【Duty Cycle】220v input with 150A output , duty cycle : 60% at 150A and 100% at 110A，Welding thickness range: 0.5-8mm，and it is suitable for welding of multi-metal and multi-process requirements.
-
【IGBT Technology】The MIG150 welder uses the most advanced IGBT inverter technology with excellent arc stability to produce perfect welding results. All projects can be completed easily and quickly.Use gas with 1kg solid welding wires 0.8/1.0mm to weld a workpiece with thickness over 0.8mm.
-
【Multifunction】Gas/Gasless MIG/MMA All are available, ARC welding (electrode 3.2mm) 7018 1/8 "very good, also 6013 and 7018 3/32"，Perfect for beginners and advanced welders!
-
【Multiple uses】Welding stainless steel, mild steel, other metal material. For home use, the switching frequency is outside the audio range, which almost eliminates the noise pollution.
-
【Warranty and Support】Buy with confidence cause Reboot provides 30-Day 100% satisfaction and return acceptable and 1-year limited warranty for this welder.
About Reboot 150A Mig Welder Flux Core Welder 220V
Parameter: MIG GAS/MIG GASLESS/MMA 3 in 1 WELDING MACHINEInput power supply voltage: AC 220±15%VRated input power capacity: 4.5KVAInput current: MIG 16A, MMA 21ARated output current: 130 ADuty cycle: 60%Output current range: 30-150 AOutput voltage range: 15-19VInsulation class: FProtection class: IP21SSize: 415×273×310MMWeight: 9.2KGEfficiency: 85%Wire Feeder : InternalWelding thickness: ±0.8mmWire diameter: 0.8/1.0mmtroubleshootingWhy is my mig130 Welder not welding properly?1. Wire feeding tension: Check the tension of the winder. Is it set too tight or the wire feed tension is not set correctly?2. Wire selection: Are you using 0.035'' wire? We recommend 0.030-0.035" for best performance.3. Reach out: Is your outstretch too long? Should your reach be no more than?4. Trigger: To start welding, pull the trigger on the MIG gun.5. Proper grounding: The ground should not be attached to painted or coated metal.
