We specialize in hard to find items
All Categories
Reboot MIG Welder 145A Mig/Stick/Lift tig Multiprocess Welder 220V Flux Core Welder with IGBT Inverter Flux Core/Solid Wire Automatic Feed Easy to use portable welding machine
Share Tweet
of brand new stock?
or
Need this item ASAP?
Check if this is available on Amazon
or available in other sites
Send us the link so we can buy for you
Reboot MIG Welder 145A Mig/Stick/Lift tig Features
-
Multi-functions in one machine：4 In 1 welder Sitck, Lift TIG, Mig (flux cored wire/solid wire), everything you need in one machine.
-
Easy to use：This machine uses a synergistic control knob to automatically match the required voltage, current and feed speed to the welder's data, achieving precise control and stable arc length during the welding process, you will master how to use this machine in minutes.
-
Safety：The welding machine has a built-in protection device, the overheating and overloading of the engine will trigger the panel indicator light, and it can be recovered after the heat dissipation is normal. Effective protection measures not only prolong the service life of the machine, but also provide safety for users.
-
Portability：Weighing only 10.5 pounds, the small size and comfortable handle make it easy to carry and store, making it ideal for outdoor work.
-
Warranty：Buy with confidence cause Reboot provides 30-Day 100% satisfaction and return acceptable and 1-year limited warranty for this welder.
About Reboot MIG Welder 145A Mig/Stick/Lift Tig
Parameter: MIG/LIFT TIG/MMA STICK 4 in 1 WELDING MACHINE Input power voltage: AC220±15% V Rated input power capacity: 4.5KVA Input current :16A for MIG,21A for MMA Rated output current :130 A Duty-cycle: 60% Output current range :30-130 A Output voltage range :15-19V Insulation class : F Protection class : IP21S Dimensions: 415×273×310MM Weight : 9.2KG Efficient: 85 % Wire feeder : Inside Power factor cosφ 0.93 Welding thickness: ≥0.8mm Diameter of wire: 0.8/1.0mm Troubleshooting Why is my mig130 Welder not welding correctly? 1. Wire feed tension: Check the tension on the spooler. Is it set too tight or is the wire feed tension not set correctly? 2. Wire choice: Are you using .035” wire? We recommend .030-0.35" for best performance. 3. Stick out: Is your stick out too long? Your stick out should be no more than ½”. 4. Pull the trigger: To begin welding, pull the trigger on the MIG gun. 5. Proper grounding: The ground should not be attached to painted or coated metal.
