We specialize in hard to find items
All Categories
trueCABLE Cat6/6A RJ45 Pass Through Connectors, Unshielded (UTP) Modular Plug, UL Listed, EZ Crimp End, Gold Plated 3 Prong 8P8C, 100 Pieces
Share Tweet
*Price and Stocks may change without prior notice
*Packaging of actual item may differ from photo shown
- Electrical items MAY be 110 volts.
- 7 Day Return Policy
- All products are genuine and original
- Cash On Delivery/Cash Upon Pickup Available
trueCABLE Cat6/6A RJ45 Pass Through Features
-
[Pass Through Design] No more load bars means less waste and frustration. The ability to see the conductors come through the front of the plug allows you to verify the correct TIA 568A or 568B color sequence which minimizes bad terminations.
-
[Maximum Performance] Ensuring the best cable to plug combination, pass through plugs allow a push-pull method to seat the cable jacket as far into the plug as possible. Triple prong gold plated contacts. Supports Power over Ethernet: PoE/PoE+/PoE++ (IEEE 802.3af/at/bt) 4PPoE up to 100W.
-
[Versatile] Works with 23AWG stranded or solid conductors. Suitable for cable jacket diameters up to ∅7.30mm and conductor insulation diameters from ∅1.05 - 1.15mm. Terminate with our All in One Crimp and Termination Tool.
-
[Quality Guaranteed] ANSI/TIA 568 2.D Certified and Validated with trueCABLE U/UTP Ethernet cable. ETL, UL, SGS (RoHS REACH / SVHC) Verified and Tested. FCC compliant.
-
[Resealable Bag] These transparent gold plated RJ45 plugs are sure to make your install hassle free.
About TrueCABLE Cat6/6A RJ45 Pass Through
Looking for a Cat6 RJ45 plug that is: Hassle-Free Well documented ANSI/TIA 568 Certified ...tested with real cables in the real world by real installers Look no further, as you just found your plug! Our Cat6 RJ45 plugs are to be used with unshielded (U/UTP) Ethernet cables, both stranded and solid conductors. The pass through design is where your frustration level will come down and success rate will increase. If you’ve ever dealt with the old style push-in or push-in with load bar plugs, then you know what we mean. After stripping the cable jacket off and combing out the individual conductors, simply line up the conductors into the correct T568A or T568B color sequence and push them through the nose of the connector. Everything look good? If the wiring sequence is still correct, now pull. Use the push-pull method to help eliminate kinking of the conductors inside the plug and get the cable jacket up as far as possible into the rear of the connector. Using our Heavy Duty Pass Through Crimp and Termination Tool, crimp and terminate the plug onto your cable. The conductors are shaved off, and the plug is ready to go. Onto the next one! If you have a crimp and termination tool that doesn’t shave off the conductors automatically, no big deal. Simply terminate the plug as you usually do and then flush cut the excess from the nose of the plug. Double check to make sure you don’t leave any conductors protruding. Our 5” Flush Cutters are ideal for this application. Compatible with 23AWG unshielded Ethernet cables with cable jacket diameters ranging from ∅5.90 - 7.10mm and conductor insulation diameters from ∅0.95 - 1.05mm. Backwards compatible with Cat5e if your cable meets these dimensions. This plug has been thoroughly tested and verified with our trueCABLE Cat6 U/UTP Ethernet cables.
