trueCABLE Cat6A Extra Large RJ45 Pass Through Connectors, Staggered, Unshielded (UTP) Modular Plug, UL Listed, EZ Crimp End, Gold Plated 3 Prong 8P8C, 100 Pieces

Pay with

trueCABLE Cat6A Extra Large RJ45 Pass Through Features

• PASS THROUGH DESIGN. No more load bars means less waste and frustration. The ability to see the conductors come through the front of the plug allows you to verify the correct TIA 568A or 568B color sequence which minimizes bad terminations.

• MAXIMUM PERFORMANCE. Staggered conductor design minimizes NEXT/FEXT. Ensuring the best cable to plug combination, pass through plugs allow a push-pull method to seat the cable jacket as far into the plug as possible. Triple prong gold plated contacts. Suitable for PoE, PoE+ and PoE++.

• VERSATILE. Works with 23AWG stranded or solid conductors. Suitable for cable jacket diameters up to ∅7.30mm and conductor insulation diameters from ∅1.05 - 1.15mm. Terminate with our All in One Crimp and Termination Tool (B089B4Z5RV).

• QUALITY GUARANTEED. ANSI/TIA 568 2.D Certified and Validated with trueCABLE U/UTP Ethernet cable. ETL, UL, SGS (RoHS REACH / SVHC) Verified and Tested. FCC compliant.

• 100 PIECE RESEALABLE BAG. These transparent gold plated RJ45 plugs are sure to make your install hassle free.

About TrueCABLE Cat6A Extra Large RJ45 Pass Through

Looking for a Cat6A RJ45 plug that is: Hassle-Free Well documented ANSI/TIA 568 Certified ...tested with real cables in the real world by real installers   Look no further, as you just found your plug!  Our Cat6A RJ45 plugs are to be used with unshielded (U/UTP) Ethernet cables, both stranded and solid conductors. The pass through design is where your frustration level will come down and success rate will increase. If you’ve ever dealt with the old style push-in or push-in with load bar plugs, then you know what we mean. After stripping the cable jacket and combing out the individual conductors, simply line up the conductors into the correct T568A or T568B color sequence and push them through the nose of the connector. Everything look good? If the wiring sequence is still correct, now pull. Use the push-pull method to help eliminate kinking of the conductors inside the plug and get the cable jacket up as far as possible into the rear of the connector. Using our Heavy Duty Pass Through Crimp and Termination Tool, crimp and terminate the plug onto your cable. The conductors are shaved off, and the plug is ready to go. Onto the next one! If you have a crimp and termination tool that doesn’t shave off the conductors automatically, no big deal. Simply terminate the plug as you usually do and then flush cut the excess from the nose of the plug. Double check to ensure you don’t leave any conductors protruding. Our 5” Flush Cutters are ideal for this application. Compatible with 23AWG unshielded Ethernet cables with cable jacket diameters ranging from ∅6.20 - 7.30mm and conductor insulation diameters from ∅1.02 - 1.15mm. Backwards compatible with Cat5e and Cat6 if your cable meets these dimensions. This plug has been thoroughly tested and verified with our trueCABLE Cat6A U/UTP Ethernet cables.