We specialize in hard to find items
(1)
StanceMagic Hubcentric Rings (Pack of 4) - 56.1mm ID to 72.6mm OD - Black Poly Carbon Plastic Hubrings - Compatible with Subaru Honda Acura Scion FRS and 72.6mm Wheel Centerbore
Share Tweet
*Price and Stocks may change without prior notice
*Packaging of actual item may differ from photo shown
- Electrical items MAY be 110 volts.
- 7 Day Return Policy
- All products are genuine and original
- Cash On Delivery/Cash Upon Pickup Available
StanceMagic Hubcentric Rings (Pack of 4) - 56.1mm Features
-
StanceMagic Hub Centric Rings made of corrosion resistant polycarbonate plastic. These hubrings will reduce or eliminate vibrations caused by a gap between your aftermarket wheel's centerbore and your wheel hub. Having a gap will prevent your wheel from centering properly during installation, leading to vibrations.
-
HUB RING INNER DIAMETER: 56.1mm (Your vehicle's hub lip diameter needs be this size)
-
HUB RING OUTER DIAMETER: 72.6mm (Your wheel's center bore needs to be this size)
-
Compatible with 1986-2001 Acura Integra. Compatible with Honda 1982-1989 Accord, 1979-2005 Civic, 1993-1997 Civic Del Sol, 1988-1991 CRX, 2006-2020 Fit, 1979-1991 Prelude. Compatible with 2000-2009 Kia Spectra. Compatible with 2002-2013 Mini Cooper. Compatible with 2013-2016 Scion FR-S FRS. Compatible with Subaru 2003-2006 Baja, 2013-2021 BRZ, 1998-2021 Forester, 1993-2021 Impreza, 1990-2021 Legacy, 2000-2021 Outback, 2008-2014 Tribeca, 2013-2021 XV. Compatible with 2017-2021 Toyota 86.
-
IMPORTANT: Before ordering, measure your rim/wheel center bore and your vehicle hub lip size, and make sure it matches the hub centric rings specifications shown on this listing. Installation is simple and requires common tools used to remove/install rims and tires. NOTE that these can only eliminate vibrations caused by uncentered wheels. Vibrations may also be caused by improperly balanced or damaged wheels and tires, worn out joints, among others.
About StanceMagic Hubcentric Rings (Pack Of 4) - 56.1mm
What are Hub Centric Rings? (Also called hubrings, hubcentric rings, centering rings) This device is installed between the vehicle's hub and the wheel center bore. The hubring fills in the gap between the hub lip and the centerbore of the wheel. This is assuming that your wheel's centerbore is not already centered around the hub.Why do I need it? You may experience steering wheel vibrations if your wheel's centerbore does not perfectly center on your vehicle's hub. Hubrings eliminate those vibrations by properly centering the wheel onto your vehicle's hub.How can I confirm fitment? - Hubrings have 2 measurements, typically in millimeters (mm). - The SMALLER of the 2 measurements is the INNER DIAMETER. In the case of this item, it is 56.1mm. This should match your vehicle's hub bore. - The LARGER of the 2 measurements is the OUTER DIAMETER. In the case of this item, it is 72.6mm. This should match your wheel's centerbore.Compatibility Information: These hubrings can fit vehicles with a 56.1mm Hub. Your Wheel Bore must be 72.6mm.Important Fitment Notes - Required Buyers Check These Before Purchasing - Buyers must ensure their Vehicle's Hub is 56.1mm. - Buyers must ensure their Wheel's Centerbore is 72.6mm. - If you are not unsure about fitment or the measurements, please do not guess. Use the "Have a Question?" section below. Be sure to include vehicle year/make/model.Installation Advisory Be sure to clean your hub prior to installation. Because of the tight tolerances of the hubrings (to ensure tight fit), a dirty hub could cause the ring to not fit.
