We specialize in hard to find items
All Categories
StanceMagic Hubcentric Rings (Pack of 4) - 64.1mm ID to 66.1mm OD - Black Poly Carbon Plastic Hubrings Hub - Only Compatible with Honda Acura with 64.1mm Vehicle Hubs and 66.1mm Wheel Centerbore
Share Tweet
of brand new stock?
or
Need this item ASAP?
Check if this is available on Amazon
or available in other sites
Send us the link so we can buy for you
StanceMagic Hubcentric Rings (Pack of 4) - 64.1mm Features
-
StanceMagic Hub Centric Rings made of corrosion resistant polycarbonate plastic. These hubrings will reduce or eliminate vibrations caused by a gap between your aftermarket wheel's centerbore and your wheel hub. Having a gap will prevent your wheel from centering properly during installation, leading to vibrations.
-
HUB RING INNER DIAMETER: 64.1mm (Your vehicle's hub lip diameter needs be this size)
-
HUB RING OUTER DIAMETER: 66.1mm (Your wheel's center bore needs to be this size)
-
Compatible With Acura 1997-2003 CL, 2006-2011 CSX, 2013-2021 ILX, 1997-2001 Integra Type R, 1986-1990 Legend, 2001-2021 MDX, 2007-2021 RDX, 1995-2012 RL, 2014-2021 RLX, 2002-2006 RSX, 1995-2014 TL, 2015-2021 TLX, 2004-2014 TSX.
-
Compatible with Honda 1990-2021 Accord, 2006-2021 Civic, 2016-2021 Clarity, 1997-2021 CR-V, 2011-2016 CR-Z, 2003-2011 Element, 2016-2021 HR-V. Compatible with 2018-2021 Insight, 1995-2021 Odyssey, 2019-2021 Passport, 2003-2021 Pilot, 1992-2001 Prelude, 2006-2021 Ridgeline. Also compatible with Tesla 2012-2021 Model S, 2015-2021 Model X, 2017-2021 Model 3, 2020-2021 Model Y.
About StanceMagic Hubcentric Rings (Pack Of 4) - 64.1mm
What are Hub Centric Rings? (Also called hubrings, hubcentric rings, centering rings) This device is installed between the vehicle's hub and the wheel center bore. The hubring fills in the gap between the hub lip and the centerbore of the wheel. This is assuming that your wheel's centerbore is not already centered around the hub.Why do I need it? You may experience steering wheel vibrations if your wheel's centerbore does not perfectly center on your vehicle's hub. Hubrings eliminate those vibrations by properly centering the wheel onto your vehicle's hub.How can I confirm fitment? - Hubrings have 2 measurements, typically in millimeters (mm). - The SMALLER of the 2 measurements is the INNER DIAMETER. In the case of this item, it is 64.1mm. This should match your vehicle's hub bore. - The LARGER of the 2 measurements is the OUTER DIAMETER. In the case of this item, it is 66.1mm. This should match your wheel's centerbore. Compatibility Information: These hubrings can fit Honda and Acura vehicles with a 64.1mm Hub. Your Wheel Bore must be 66.1mm. Message us with year/make/model if you have any fitment questions. Important Fitment Notes - Required Buyers Check These Before Purchasing - Buyers must ensure their Vehicle's Hub is 64.1mm. - Buyers must ensure their Wheel's Centerbore is 66.1mm. - If you are not unsure about fitment or the measurements, please do not guess. Send us a message and we are happy to help.Installation Advisory Be sure to clean your hub prior to installation. Because of the tight tolerances of the hubrings (to ensure tight fit), a dirty hub could cause the ring to not fit.
