We specialize in hard to find items
(3)
Stronghero3D PLA 3D Printer Filament 1.75mm BRO Rainbow 1kg(2.2lbs) for ender3
Share Tweet
*Price and Stocks may change without prior notice
*Packaging of actual item may differ from photo shown
- Electrical items MAY be 110 volts.
- 7 Day Return Policy
- All products are genuine and original
- Cash On Delivery/Cash Upon Pickup Available
Stronghero3D PLA 3D Printer Filament 1.75mm BRO Features
-
3D printer filament ,pla filament,pla 1.75mm, net weight 1kg.Co extrude core shell structure, the core is PETG and shell is PLA. PLA copper/brass/bronze ,pla multicolors, pla rainbow
-
PLA color in surface ,copper,bronze and brass, petg black and transparent color in core appear frequently to the surface while printing some place of curved and ladder like,which makes the color change fast.
-
It is suggested that the nozzle should be used at a temperature of 195-215 ℃. If hairy when printing, adjusted gradually by 5-10 ℃ each time. The platform can be glass, acrylic plate or PEI sheet, heat bed temp 50-70 ℃
-
To prevent filament tangling, make sure to secure the filament end either within the spool's designated hole or elsewhere after 3D printing. In case the filament end accidentally slips past during extrusion, rewind the filament to check for any potential tangles.
-
In order to reduce possible warping of the first layer, we recommend preheating the hot bed temperature to 55-65 degrees, reducing the printing speed of the first layer to 25mm/s, and setting the line width to 0.6mm or the flow rate to 150%, excessive fan cooling in cooler weather will worsen edge warping.
-
PLA filament 1.75mm,net weight 1kg.Vacuum sealed and includes silica desiccant
About Stronghero3D PLA 3D Printer Filament 1.75mm BRO
PLA serials, PLA is very easy to print, some infill pla formulation require the first layer closer to heat bed, a good first layer is key point to avoid warp , and the cooling fan off at the first some layers. Once you don’t print well to slow down the print speed always is a good way. PLA original is brittle, the filament is for 3d printing, not for bending test, filaments are not easy to break without intend to bend. Temp range 185-230 degree on vary 3d printers, if you see hair when printing, adjust temp 5-10 degree each time until you satisfy. PLA can print on many materials , blue tape ,glass, hair spray ,PEI, PVC, all run well. To avoid tangle need a good habit, don’t loose the filament end missing in the filament bunch, you pick a wrong order arrange will mess them severely.
