We specialize in hard to find items
All Categories
Stronghero3D PLA 3D Printer PLA Filament 1.75mm,Core Shell Co Extruded Dual Colors Filament,Matte Rock Yellow Brown Red Black Filament,Net Weight 1kg/2.2lb for Ender3 P1S P1P X1C
Share Tweet
*Price and Stocks may change without prior notice
*Packaging of actual item may differ from photo shown
- Electrical items MAY be 110 volts.
- 7 Day Return Policy
- All products are genuine and original
- Cash On Delivery/Cash Upon Pickup Available
Stronghero3D PLA 3D Printer PLA Filament Features
-
3D printer filament ,pla filament,pla 1.75mm, net weight 1kg.Co extrude core shell structure, the core is ABS and shell is PLA. Print temp should be higher than 240 degree,print speed lower than 100 mm/s.
-
PLA color in surface ,yellowish brown, ABS black and white color in core appear frequently to the surface while printing some place of curved and ladder like,which makes the color change fast.
-
Printing setting recommend heated bed 50-60°C, nozzle 195-220°C,printing speed 25-100 mm/s,retraction lenth 3-5mm, support flow 70%,not designed for high speed printing.Choose a suitable model,rugged and tortuous surfaces lead to frequent color changes, while smooth surfaces result in a single color.
-
To prevent filament tangling, make sure to secure the filament end either within the spool's designated hole or elsewhere after 3D printing. In case the filament end accidentally slips past during extrusion, rewind the filament to check for any potential tangles.
-
In order to reduce possible warping of the first layer, we recommend preheating the hot bed temperature to 55-65 degrees, reducing the printing speed of the first layer to 25mm/s, and setting the line width to 0.6mm or the flow rate to 150%, excessive fan cooling in cooler weather will worsen edge warping.
-
PLA filament 1.75mm,net weight 1kg.Vacuum sealed and includes silica desiccant
About Stronghero3D PLA 3D Printer PLA Filament
PLA core shell filament
