All Categories
Window Film Specifications Length:1m (39.37 inch) Width: 50cm (19.68inch) Thickness: 0.05mm (0.0019 inch) UV Rejection: 99% High Heat Rejection: 20% Reduce glare. sun block effect. Help save energy costs and keep your rooms or offices cooler. Creative a complete daytime privacy space. How to use: 1. Tear protective film 2. Prepare a spray bottle filled with water. add a little detergent entered. Sprayed on the surface of the glass and film 3. The membrane attached to the glass. and then peel off that layer of transparent protective film attached to the mask on top of window film to prevent mirror film being scratched 4. Use a scraper shoot except air and excess water 5. The film Collage with a spatula repair neat Installation instructions: Before paste.must clean the window.don't residue any oil and impurities. Using gummed paper to install.then cut the film to a suitable size. After paste.the film should be standing about 7 hours under the condition of without external force to ensure the gummed paper can completely stick to window. Note: This mirror film is transparent. privacy effect is by the strength of contrast of light to decide. After posted daytime indoor look outside very clear. Outdoor basically can not see the room in strong light. The evening can be seen inside and outside. remember to hang curtains.