Water ball valve - TOOGOO(R)6mm 1/4 "ball stopcock ball valve with clutch stopcock RO System

Pay with

About Water Ball Valve - TOOGOO(R)6mm 1/4 "ball Stopcock

* TOOGOO is a registered trademark. ONLY Authorized seller of TOOGOO can sell under TOOGOO listings. Our products will enhance your experience to unparalleled inspiration. TOOGOO(R)6mm 1/4 "ball stopcock ball valve with clutch stopcock RO SystemSpecifications:Name: 1/4" Ball Valve ConnectorMaterial: non-toxic food PP materialOuter diameter: (approx.) 6mm£¨ 1/4"£©Color: White+BlueInstallation procedure:1. in threaded quick connector with raw belt wrapped; 2. with the appropriate force to tighten fast connections, if excessive force may tighten bad connector, if the force is not enough can cause leaks water;3. the top tube will be inserted vertically cut flat knife. The wall of the tube to be inserted should be smooth, clean, no scratches;4. Remove the blue clamp and cut the top of the insertion tube quick connector, plug in the end;5. put the card at the quick connector clamp loop, to avoid accidental unplugged in use process.Removal procedure:1. first check the inlet whether to close, to ensure the water pressure is zero;2. removed the quick snap loop;3. the chuck the quick connector hold down at the same time, the other hand to pull out the tube.Package include:1 x 1/4" Ball Valve Quick ConnectorNote:Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3 cm.