FIMCO Manufacturing Inc. 1” 6 Outlet Mini Indexing Valve with 5 and 6 Zone Cams Model# 9256-1006

Pay with

FIMCO Manufacturing Inc. 1” 6 Outlet Mini Features

• There are several different sizes of inlets and outlets for this product. All are listed on Amazon. PLEASE BE SURE YOU ARE SELECTING THE CORRECT SIZE FOR YOUR INSTALLATION

• Valve has a 1 inlet and 6 outlets that will accept 1" pipe (Please remember that pipe size is measured by inside diameter)

• Can run from 5 to 6 zones based on the chosen cam configuration (3 and 4 zone installations require a special 'white' cam)

• FIMCO 1 in. 6 zone valve comes with the 6 zone cam installed and an included 5 zone cam

• Great alternative to individual solenoid valves

• 1 valve can replace (6) 1 in. solenoid valves

• Only use clear PVC cement (not included) and allow the valve 2 hours to set before subjecting it to internal water pressure, do not use fast setting blue glue as it will rapidly deteriorate the ABS plastic used in construction of the indexing valve, purple primer is similar and must be used only on the PVC pipes and not the valve housing

• An anti-siphon valve (not included) is recommended and may be required for safe operation of the FIMCO hydro indexing valve on a city water installation

• 10 PSI min pressure rating, 1 in. inlet/outlet, and requires 10-25 GPM flow rate

• Please remember that pipe size is measured by inside diameter. This valve is made to accept 1″ pipe so the outlets and inlets will be larger than the pipe size it receives.

About FIMCO Manufacturing Inc. 1” 6 Outlet Mini

The model #9256 Hydro Indexing Valve has one inlet and six outlets which are all made to fit 1" slip fit pvc. This valve is recommended for use in a city water driven irrigation system and can run from 5 to 6 zones based on the chosen cam configuration. The standard flow stem and disc assembly requires a minimum of 10GPM.Please remember that pipe size is measured by inside diameter. This valve is made to accept 1″ pipe on the inlet and outlets. The outlets and inlet will be larger than the pipe size it receives.