All Categories
Get it between 2025-02-07 to 2025-02-14. Additional 3 business days for provincial shipping.
【Great compatibility】8.5 inch solid tire replacement for Gotrax GXL V2 replacement for Gotrax XR replacement for Gotrax Apex XL replacement for Gotrax VXL G2 replacement for Gotrax XR ELITE replacement for Hiboy S2 replacement for Hiboy S2 Max for Hiboy S2 MAX replacement for Hyper gogo replacement for Xiaomi m365/1S/Pro replacement for AovoPro ES80 etc.electric scooter tire replacement.Perfectly compatible with 50/75-6.1 solid tires, it is an excellent front and rear replacement tire.
【High superior quality 】Solid tire made of high-quality rubber material with rubber grooved surface provides excellent grip! The pattern is solid honeycomb tires that do not need to be inflated, are more durable. The high quality durable rubber is built to withstand thousands of miles of use!
【Natural rubber】The 8 1/2 inch scooter tire is made of high-quality natural rubber material. Durable design, more wear-resistant, more stab resistant, explosion-proof, very durable and durable, with a longer service life.
【Features】 Stormytime 8.5 inch wheel: No swelling, no tube, no pinning, no need to worry about puncture, no maintenance, always in the best condition. As a result, tires can withstand any pressure change, just as regular tires are as strong when fully inflated.
【Solid tyres】To install an 8 1/2 solid tire, it must be heated three times in a microwave oven, then relaxed slightly or boiled in boiling water for 10 minutes. For detailed information on the installation video, please refer to the manual or seek help from Stormytime. It is worth noting that this is an excellent scorer replacement wheels.
Description ✈Great shopping experience! Brand: Stormytime WELLSTRON Here’s what you will need for the job: √ New solid tires, √ Allen wrench, √ Razor blade, √ Flat blade screwdriver, √ 18mm wrench, √ Lubricant, √ Silicone paste. The installation process consists of two parts: Remove the inflatable tire. 1. Find the red label and pull it off then loosen the two screws below it. 2. Remove the first plastic cover then loosen the other four small screws below it. 3. Turn the scooter over to the other side and repeat the process. You should now be left with one nut embedded deeply into the wheel under a plastic cover that is attached to the wheel support system. Lift the cover slowly to avoid cracking it then loosen the nut below it using a wrench. 5. The wheel is now adequate enough to slide out easily. The motor cable is still attached (to the front wheel) so do not pull it off. Fitting in the solid tire. 1.Add a lubricant on the rim of the wheel. This should manage the amount of friction that will be involved during the fitting. 2. You need to soften the solid wheel before fitting it: Boil some water to about 100oC in a pot large enough to fit the tire. Put it in (make sure that it is wholly immersed) then leave it for ten minutes. 3. As an alternative, you can heat the tire in a microwave for three minutes, checking it after every minute. 4. Once the wheel is soft enough, remove it and fit the rim into it. Let it cool for five minutes. 5. Fasten the nut and the other screws (while replacing the plastic cover) on both sides. This is basically the reverse of the initial process of removing the wheel. Also, make sure that you return the red labels. NOTE:If you still don't know how to install your tires, please contact us and we will give you an easy installation tutorial video, a complete service system. Your scooter is now ready to go!!!