We specialize in hard to find items
All Categories
PneumaticPlus PPC2C-N02DG Mini Three Stage Air Drying System, 1/4" NPT - Particulate Air Filter, 0.3 Micron Coalescing Filter, Air Pressure Regulator Combo - Poly Bowl, Auto Drain, Embedded Gauge
Share Tweet
*Price and Stocks may change without prior notice
*Packaging of actual item may differ from photo shown
- Electrical items MAY be 110 volts.
- 7 Day Return Policy
- All products are genuine and original
- Cash On Delivery/Cash Upon Pickup Available
PneumaticPlus PPC2C-N02DG Mini Three Stage Air Features
-
Max. Supply Pressure: 250 PSI, Max Operating Pressure: 140 PSI, 7SCFM @ 90PSI
-
Particualte Filter: 5 Micron Element, Coalescing Filter: 0.3 Micron Element, Port Size:1/4" NPT
-
Auto Drain & Poly Bowl with Guard, Includes 0-140 PSI Embedded Pressure Gauge
-
Use Metal bowl in pressure exceeding 150PSI or when solvents harmful to polycarbonate is present
-
ORIGINAL EQUIPMENT MANUFACTURER - Made In Korea
About PneumaticPlus PPC2C-N02DG Mini Three Stage Air
How It Works First, the air enter the particulate filter, which has 5 micron cleanable Polyethylene element. In this stage, corrosive moisture, pipe scale, dirt and rust are removed from air line protecting the precision part in the regulator. During Stage 2, fine filtration takes place. Here, 99.7 percentage of oil aerosols and microscopic particles down to 0.3 micron absolute are removed from the air. Third Stage, the air enter a high-performance regulator, which reduces primary pressure to a desired pressure setting. Installation Install units so the airflow is in the direction "IN-OUT" as indicated by arrow on the head of the unit. Install filter first in line of additional units such as regulators or lubricators, and as close as possible to the pneumatic tools or appliances being serviced. Unit must be installed in parallel from floor, downstream position for proper function. Do not install polycarbonate bowl in pressure that exceeds 150 PSI or where there is a presence of solvents harmful to polycarbonate. In these cases, use a metal bowl. The Unit can dis-assemble or assemble using a Phillips-head screwdriver or Allen wrench. An insert feature allows simple installation and removal in any location without disturbing the existing piping arrangement. The regulator can be mounted in either up or down position. This unique design allows unlimited adaptation to air preparation systems. Unit will permit use of standard size pipe nipples. Operation & Adjustments Filtering out of dirt and foreign particles, and the separation of moisture is automatic with air flow. There are no moving parts and no adjustments are necessary. Accumulated sludge and moisture should be drained off. Sediment should not be permitted to fill above the lower baffle. Wash filter element at intervals with methylene chloride or similar cleansing fluid to maintain filtering efficiency.
