We specialize in hard to find items
(2)
Mikov V2004067 Unhandled Super Thin Blade Dual Bevel Marking Knife Kit 0.030 Inch Thick Blade 1/2 Inch Wide 5-7/8 Inch Long Stainless Steel Hardened to HRC 57
Share Tweet
*Price and Stocks may change without prior notice
*Packaging of actual item may differ from photo shown
- Electrical items MAY be 110 volts.
- 7 Day Return Policy
- All products are genuine and original
- Cash On Delivery/Cash Upon Pickup Available
Mikov V2004067 Unhandled Super Thin Blade Dual Features
-
This unhandled Dual Bevel Spear Point marking knife kit was made to our specifications by Mikov a world-class Czech knife maker. Mikov is currently the largest knife maker in the Czech Republic and has been making knives since 1794. maker. Mikov is currently the largest knife maker in the Czech Republic and has been making knives since 1794.
-
The blade is made from AISI 420 corrosion resistant stainless steel and hardened and tempered to HRC 57. This is the same steel used in many of Mikov’s kitchen knives and is designed to take and hold a keen edge and resist corrosion.
-
The blade is 5-7/8 inches long, 1/2 inch wide and 0.030 inch thick. The blade has a dual-bevel spear point tip. The tip is ground to 55 degrees with a 25-degree angle grind on both bevels. The bevels are precision ground on CNC machines.
-
The blade is the perfect tool to make marks in narrow recesses such as when transferring pins/tails marks during dovetailing. The dual bevel will mark distinct lines equally well on both the right and left side of a part or guide. It will leave crisp lines marking with and against the grain and on end grain. The knife may require just a light stropping to remove a small wire edge to get it razor sharp and ready to use.
-
The knife can be used either unhandled or wood scales can be attached to make a handle. If a handle is desired the kit comes with 2 brass pins to affix the scales to the blade.
About Mikov V2004067 Unhandled Super Thin Blade Dual
A marking knife is an invaluable tool that should be in the toolbox of every woodworker. A good marking knife can produce crisp and well-defined marks on wood essential when laying out precision joinery or transferring measurements. Scribe lines left by a marking knife can also locate and guide chisels and saws. While numerous well-made marking knives are available, we commissioned this marking knife made to our specifications. This Dual Bevel Spear Point marking knife was made by Mikov a world-class Czech knife maker. Mikov is currently the largest knife maker in the Czech Republic and has been making knives since 1794. Mikov makes a wide range of pocket, folding, fixed blade, hunting, sport, kitchen, and specialty knives. Mikov is best known for making high-quality everyday knives using premium materials for very affordable prices. This marking knife is no exception. The blade is made from AISI 420 corrosion resistant stainless steel and hardened and tempered to HRC 57. This is the same steel used in many of Mikov’s kitchen knives and is designed to take and hold a keen edge and resist corrosion. The blade is 5-7/8 inches long, 1/2 inch wide and 0.030 inch thick. The blade has a dual-bevel spear point tip. The tip is ground to 55 degrees with a 25-degree grind on both bevels. The bevels are precision ground on CNC machines. The blade is the perfect tool to make marks in rrow recesses such as when transferring pins/tails marks during dovetailing. The dual bevel will mark distinct lines on both the right and left side of a part or guide. It will leave crisp lines when marking with and against the grain and on end grain. The knife may require just a light stropping to remove a small wire edge to get it razor sharp and ready to use. The knife can be used either unhandled or wood scales can be attached to create a handle. If a handle is desired the kit comes with 2 brass pins to affix scales to the blade.
