All Categories
1 pulse per 1 cu ft.
Suitable gas: natural gas, gaseous propane, air, other non-corrosive gases
Readout is in cubic feet, with resolution to tenths
Remote Readable
Operating ambient temperature: -13~131ºF
Type: 1.5 Inch Pulse Output Gas Meter Capacity:565ft³/hr (581,950 BTU/hr natural gas) Mounting: Outdoor Mount Units: Cubic Feet Pulse Output: 1 Pulse Per Cubic Foot Dimensions: 327mm tall x 316mm wide x 226mm deep Model: PGM-150-CF Readable on the meter dials and remotely too! Our pulse output gas meters operate like a traditional mechanical gas meter. They also have the ability to be read remotely. For every cubic foot of gas that is metered, this gas meter produces an electrical pulse. These pulses can be measured and counted by our EKM Omnimeter Pulse v.4, which is our pulse counting electric meter. This pulse counting meter has the ability to count pulses from up to three pulse-output devices. When connected to a v.4 Omnimeter, the gas meter can send pulse data the cloud with our EKM Push3 cloud-based data system. The EKM Push3 sends all of your meter data to our cloud database and inserts it into your personal account, where you can access it securely for free. In other words, with this system you can easily meter gas usage, at an unlimited number of sites around the world, for free. You can use this meter to measure natural gas, gaseous propane, air, or any other non-corrosive gas. Simple 2-wire connection between gas meter and v.4 Omnimeter. No additional power source is required. Pulse count can be read remotely online using the our EKM Push3 data system. Free online tenant billing tools available. Very reasonably priced gas meter, even without the pulse output. 1 Pulse Per Cubic Foot (approx 1 pulse per 0.0283 cubic meter).