We specialize in hard to find items
(1)
Mokaou Newest Heat-Set Insert Tips for Sizes M2 M2.5 M3 M4 and M5 compatible for FX-888D SP40NKUS T18 900M FX600 ST WLC100 Soldering Irons and 3D Printer Users Heat Set Inserts.
Share Tweet
*Price and Stocks may change without prior notice
*Packaging of actual item may differ from photo shown
- Electrical items MAY be 110 volts.
- 7 Day Return Policy
- All products are genuine and original
- Cash On Delivery/Cash Upon Pickup Available
Mokaou Newest Heat-Set Insert Tips for Sizes M2 Features
-
【Heat set insert tips】Its long shank tip perfectly matches the fx-888d , T18 , 936,937,907,SP40KNUS , 937 and ST series.Heat set insert tips sizes include M2 M2.5 M3 M4 and M5 .Do not worry that the corners of the 3D printer are too tight, because when installing the thermosetting insert, it is very easy to contact the 3D printer parts to solve the problem without touching the iron and melting plastic.They are good heat set insert tools
-
【Heat set insert tools】Installation of soldering tip works better than the soldering iron because the conical tip may get stuck on the insert and accidentally pull out the insert when melting plastic and damaging parts.
-
【Different heat-set insert tips 】Five kinds of heat-set tips, including M2 M2.5 M3 M4 and M5 Check and measure the right size, and fix the exact size on the equipment model when using.
-
【Daily Care】In order to maintain the performance of heat-set Insert tips, please put them in a dry and clean environment when not in use.
-
【Heat set insert for 3D printing】The wide size range allows you to flexibly select the appropriate insert for 3D printing projects.
-
【Noting tips】It is normal for these heat set insert tips to change color when heated
About Mokaou Newest Heat-Set Insert Tips For Sizes M2
Heat set insert tips perfectly compatible with the FX-888D T18 900M FX600 SP40NKUS ST and WLC100.If the heat set insert tip was too small for the inserted object, the plastic would return to the thread, which made it difficult to twist the screw into the inserted object. Most of the time, your parts might be damaged.In order to do better, we have improved the heat set insert size to make it fit better with plastic parts When you inject and connect a 3D printer, heat set insert tip makes the moulded parts easier and stronger. Once heated, the beautiful shiny brass turns black. This is normal. If you happen to get plastic on the tip, you can wipe it with a wet rag, steel or brass cotton. Acetone can be cleaned chemically, but make sure the iron is not hot! If the hole is not deep enough, there is nowhere to go for the melting plastic of the insert. In the worst case, the plastic may penetrate back into the center, making it difficult to screw in screws or pile up around the insert at the top edge. If you are not satisfied with these heat set insert tips,Just email us if there is any problem,we will respond promptly.
