Proffieboard V3.9 - Open Source Lightsaber Sound Board (Without 16GB Micro SD, White)

Pay with

Proffieboard V3.9 - Open Source Lightsaber Sound Features

• 80Mhz ARM processor

• 3-watt amplifier (mono)

• 450mA USB charging

• BATT+ - 2.6 to 5 volt input, drives everything except the LEDs

• 5v - generated by the proffieboard, normally it's only on when sound is playing.

• Skill Level: Assembled and Tested

About Proffieboard V3.9 - Open Source Lightsaber Sound

The Proffieboard is a revolution in lightsaber electronics. Fully open source this feature packed board includes smooth swing which provides the most realistic sound effects we have seen in a sound board. The v3.9 ProffieBoard is the latest update in the Proffieboard saga and features a more powerful STM32 microprocessor combined with a motion coprocessor IMU, 3W audio amplifier, and 6 MOSFETs to control external LEDs. It features USB charging, support for deep sleep, additional flash memory (512kb), and much more. New in V3.9: More FLASH (512kB instead of 256kB): This means more presets, but it also means we can now turn on optimization without running of of memory More RAM (160kB instead of 64kB): No immediate effect, but makes mp3 and echo effects possible More PINS: New CPU is BGA with 64 pins instead of 48. This means more data pins, and and other things, listed below Faster SD card access. The new board uses SDIO instead of SPI to access the SD card. SDIO is significantly faster than SPI. In initial testing I got 20 parallel streams. This means less problems with SD card and more CPU for doing other things. USB charging: The V3 board has onboard charging configured for 450mA charge speed. An onboard status LED helps show what the board is doing and when something goes wrong. Three new “free” pads. These can either be used to drive 20mA LEDs directly, or as neopixel data pads, button pads or servos. The SWDIO, SWDCLK and RESET pads have been moved to the bottom of the board to make room for these new pads. DM/DP/VBUS pads for external USB spot for additional large capacitor if needed (helps when driving BT modules) Two CPU pins are already tied together for Data1, making blade ID work without additional components Power and AUX buttons are wakeup capable, unlocking the possibility of a deep sleep mode