CNCEST Jewelry Spot Welding Machine,110V 450W Electric 0.5-80A Adjustable Pulse Sparking Spot Welder Jewelry Tool with Foot Pedal for Platinum,Gold,Silver and Steel (JD Welding Machine)

Pay with

CNCEST Jewelry Spot Welding Machine,110V 450W Features

• 【Parameter】Adjustable pulse spot welding machine (JD welding machine). Power supply: AC110V. Power: 450W. Welding current: 0.5-80A continuously adjustable (pulse ignition). Welding range: 0.2-1mm

• 【Advantage】 Welding can change the output pulse current according to the size of the workpiece, the size of the solder joints, and the process requirements.It can weld gold, silver, K gold, gold, palladium and platinum within 1mm in diameter. All precious metal, precious metal alloy materials, such as gold, silver, platinum, palladium, stainless steel, titanium, all of which are weak arc welding metals can be welded.

• 【Wide application】It can weld gold, silver, K gold, gold, palladium and platinum within 1mm in diameter. It can weld titanium, copper and stainless steel jewelry with a diameter of about 0.8mm. Silver, copper, jade bracelets, small rings, earrings, skilled can also weld dental wire thermocouple clocks and other internal small parts.

• 【Notice】If the place where the welder is placed is wet or not used for a long time, it will be damp. If it is found that the above phenomenon should be dried before use, the machine should be well grounded.

• 【Service Guarantee】If there is any questions please feel free to contact with us, our experienced customer service team will response in 24 hours.

About CNCEST Jewelry Spot Welding Machine,110V 450W

Specifications Power supply: AC110V Power: 450W Welding current: 0.5-80A continuously adjustable (pulse ignition) Welding range: 0.2-1mm Scope of use It can weld gold, silver, K gold, gold, palladium and platinum within 1mm in diameter. It can weld titanium, copper and stainless steel jewelry with a diameter of about 0.8mm. Silver, copper, jade bracelets, small rings, earrings, skilled can also weld dental wire thermocouple clocks and other internal small parts. Instructions: 1. Before using the welding machine, first check whether the power supply conforms to the working voltage. 2. Connect the output line of the welding machine to the screw of the corresponding output stage (when the output line is connected to the output pole, tighten the nut) 3. When working, clamp the workpiece on the output black line with a fixture, close to the tungsten needle (according to the size and shape of the workpiece, the distance between the tungsten needle and the workpiece is usually 0.5-1mm). After the welding position is fixed, click the foot switch, and the high-temperature arc between the workpiece and the tungsten needle will weld the workpiece immediately. 4. The discharge end of the tungsten needle must be kept sharp before and during use to maintain a good discharge state. 5. The output pulse current can be changed according to the workpiece size, welding spot size and process requirements (the machine can weld 0.5-1.5MM). When the potentiometer rotates clockwise, the output pulse current increases and the output pulse current decreases Precautions If the place where the welder is placed is wet or not used for a long time, it will be damp. If it is found that the above phenomenon should be dried before use, the machine should be well grounded. Please pay attention to safety when using. Standard accessories One host power cabl