Non-Skid Paint Additive - Quart for 5 gallons - COARSE Anti-Slip Particles Fas-Grip

Pay with

Non-Skid Paint Additive - Quart for 5 gallons Features

• Works Great for 2-Part Epoxy, Urethane, Gelcoats, and Enamels

• Unique Polymer Absorbs the paint so it stays the same color as it wears

• Floors, Stairs, Decks, Walkways, Factories, Inclines, Boat Decks, and Docks

• Produces a Slip-Resistant Floor

• Coarse, good for gelcoat.

About Non-Skid Paint Additive - Quart For 5 Gallons

FAS-GRIP is a unique polymer texturing agent designed for use in most coatings. Available in coarse and fine grades FAS-GRIP will stir easily into most coatings with minimal effect on the coating viscosity. The low density of FAS-GRIP allows it to stay suspended in the coating rather than sinking like sand type additives. This allows for a more even application with less mixng. Due to it’s spherical shape, FAS-GRIP is not highly abrasive, and is easy to clean due to its lack of sharp edges. Method #1: For spray brush or roll application, add 10oz of FAS-GRIP non skid particles to 1 gallon of coating.Apply by syphon gun or a pressure pot with agitator. When texture is achieved, apply a sealer coat. Method #2: Apply a tack coat to the non-skid area and then broadcast the FAS-GRIP particles (via a perforated shaker apparatus) to the wet area. Allow to tack up, blow off excess particles and then apply a final coat.