Steel Red Dot Optic Adapter Plate Compatable with CZ P10 to Mount HLOSN EPS

Pay with

Steel Red Dot Optic Adapter Plate Compatable with Features

• Compatable With: CZ P10 optics mounting pattern. **May fit other models, listed is what we've tested.**

• All mounting hardware needed comes with the order.

• Material: Precision machined, heat-treated 4140 alloy steel.

• Finish: Coated with a copper phosphate to aid in corrosion resistance.

• Hardware: (included) 4-40 x 5/16 Screws.

• Install instructions for the CZ P10 to EPS adapter plate: 1- Make sure the surfaces and threads are clean. Apply a light coat of oil to the adapter plate to prevent rusting. 2- Thread Locker 222 (purple) is recommended. No red, green, or blue thread lockers should be used. 3- Put a drop of 222 on the internal threads and on the thread's screws. 4- Use the supplied 4-40 and M3 x 0.5 screws. 5- Important Note: Use a reliable torque driver 10-13 IN. LBS. 6- Allow to cure for 24 hours.

About Steel Red Dot Optic Adapter Plate Compatable With

This precision-machined steel red dot adapter plate from Athena Precision is compatible with Holosun EPS to CZ P10 mounting pattern. We take immense pride in the aesthetics and quality of the parts we produce. Every product is engineered, manufactured, finished, and shipped from our shop in Salt Lake City, Utah. Each part is inspected with calibrated precision measuring tools and checked against a model print to maintain the tightest tolerances.