GM CLIMBING Hitch Slack Tending Pulley Kit for Doubled Rope Climbing System Basic Unit of General Hauling - 30kN Swing Cheek Micro Pulley Ball Bearing & Oval Locking Carabiner & 30in 8mm VT Prusik

Pay with

GM CLIMBING Hitch Slack Tending Pulley Kit for Features

• Slack Tending Pulley Kit from GM CLIMBING, which contains: 1x 30in 8mm Friction Hitch VT Prusik, 1x 27kN Oval Twist Locking Carabiner, 1x 30kN Swing Cheek Micro Pulley.

• Mainly used as core part of doubled-rope technique climbing system (ddrt), also widely use as flipline adjuster. For general pulley system, such kit can also made itself a pulley system with process capture.

• Ball bearing or bushing 30kN Swing Cheek Micro Pulley are chosen for kit. It's easier to install or remove rope from pulley due to swing plates, much facilitating whole set-up process.

• VT Prsuik with Heat Resistance! 50% Kevlar Fiber is mingled during sheath braiding, adding durability (cord rating to 25kN) and excellent heat resistance for your friction hitch.

• It's always a good idea to have an oval locking carabiner to use with pulleys, for better balance, also for safer operation.

About GM CLIMBING Hitch Slack Tending Pulley Kit For

GM CLIMBING 30kN Swing Cheek Micro Pulley Sheave & Plate Material: Aluminum Breaking Load: 30kN Weight: 78g / 2.7Oz Max. rope compacity: 12mm Blue-Ball bearing: less contact area with axle, more efficient with very little friction in system, excellent for high speed use Black-Bushing: larger contact area with axle, much less wear for longer service life, suitable for slow rigging with heavy weight Certification: CE1019 EN12278 / UIAA GM CLIMBING 20kN Micro Prusik Minding Pulley Plate: Aluminum Alloy Sheave: Aluminum Color: Red Size: 3.189 x 2.224in Breaking Strength: 20kN / 4500lbs Net weight: 105g / 3.7Oz Max. diameter of rope: 1/2in or 13 mm Certification: CE 1019 EN12278 / UIAA Attention: Please don't put steel cable on the sheave of pulley. GM CLIMBING Hitch Friction Prusik Eye-to-eye Length: 76cm / 30inch (end to end) Diameter: 8mm / 5/16 inch Material: Sheath-50% Kevlar & 50% Polyester; Core-Polyester Strength: 25kN / 5620lbf GM CLIMBING 25kN Oval Twist Locking Carabiner Material: aircraft-grade aluminium alloy (anodized) Breaking Strength: 25kN - minor axis: 9 kN - open gate: 9 kN Gate opening (d): 21 mm Net weight: 80g / 2.82Oz Length: 110mm - Width:60mm Certification(s) : CE 1019 EN 12275