Rapid Cure® Fluorescent Screen Printing Ink Kit - 6 Color Plastisol Ink for Screen Printing Fabric - Low Temperature Curing 8 oz. Plastisol Ink by Screen Print Direct - Inks for Silk Screens and Mesh

Pay with

Rapid Cure® Fluorescent Screen Printing Ink Kit Features

• Fabric, Paper, or Vinyl - Ideal for printing on a wide range of fabrics, including but not limited to cotton, linen, polyester, blends and so much more. This is a perfect silk screen printing starter kit.

• Permanent Fabric Printing - Our inks produce a touchable soft and vibrant finish that once cured is permanent and meant to last. With a kit for metallic, pastel, and primary colors we got you covered.

• Safe For Home Screen Printing - Perfect for custom screen printing while still being non toxic and safe for home use. All of our printing ink set 's are safe and have low odor.

• Choose Your Print Screening Kit -Choose the fabric screen print ink that works best for you. Fabric Screen Printing Ink in back, red, blue, white, green, yellow, brown, gold and even pastels.

• Made in the USA - All of our silkscreen ink is made here in the USA and hand-scooped by SPD's very finest. Non-phthalate, Non-toxic and CPSIA compliant. ADD TO CART NOW.

About Rapid Cure® Fluorescent Screen Printing Ink Kit

"Rapid Cure by Screen Print Direct is a premium plastisol ink that cures are low as 270°. Rapid Cure Plastisol Ink is the ideal ink when working with a variety of materials. This low bleed ink works great with a wide variety of blends including polyester. Say goodbye to garment shrinking and scorching with low temperature cure fabric ink. The inks lower cure temp saves production time and helps ensure the garment is cured properly without expensive conveyor dryers. The inks texture is creamy and short bodied. The color is vibrant, bold and opaque. For darker garments we recommend printing with an under-base. Disclaimer: All colors are approximate and will vary monitor to monitor. Curing: Cure at 132° C/270° F Flashing: Flash at 82-104° C/180-200°F Flash and Curing Guidelines: Generally, it will take 5-10 washes to fully test the cure, but if the ink is seriously under-cured, the print will show deterioration after only 1-3 washings washes. Another way to test your print quickly is doing the “Stretch Test” stretch the print roughly 2/3 of the T-Shirt; if the print cracks and does not retract back it means you under-cured. General Testing: Before you do any large print, we recommend doing a stretch test and a wash test to ensure you cured and printed correctly before going into production. Increase cure time if testing fails. We recommend only using natural fibers best results will be seen on 100% cotton. Clean Up: On the press: Ecotex Plastisol Press Wash/Ink Degradant In the sink: Ecotex Plastisol Screen Wash/Ink Degradant Pro Tips: Plastisol inks do not dye fabric like the traditional inks. Plastisol inks wraps around the fibers and makes a mechanical bond with the fabric. Store plastisol inks at room temperature. Prolonged exposure to temperatures above 90º F (32º C) can cause the ink to start to cure while it's still in the container."