We specialize in hard to find items
All Categories
Universal Replacement Installation Accessories for Indoor/Outdoor Sunshade and Plastic Roller Blinds(end Cap)
Share Tweet
*Price and Stocks may change without prior notice
*Packaging of actual item may differ from photo shown
- Electrical items MAY be 110 volts.
- 7 Day Return Policy
- All products are genuine and original
- Cash On Delivery/Cash Upon Pickup Available
Universal Replacement Installation Accessories for Features
-
★[Basic Information] These end caps are universal replacements for the roller blinds and sun shades.
-
★[Easy Installation] These universal replacement parts are easy to install and replace.You only need to insert the end caps into the left and right sides of the lower rod of the roller blind
-
★[Product Progress] The end cap can be used for cranks and sunshades,which are produced by Coolaroo or other companies installation.
-
★[Pack and Size] A pair of end caps for roller blinds. Size : Outer diameter (about 1.22inch), Inner diameter (about 0.71 inch).
-
★[Note] We provide 1 year warranty. If you have any questions, please contact us, we will reply in time.
About Universal Replacement Installation Accessories For
Bracket mounting operation: Mounting brackets can be mounted horizontally or vertically. After determining location to install mounting brackets, use bracket as template to mark hole positions for pre-drilling holes in surface for insertion of plastic anchors. Installation note: 1. The mounting bracket can be installed horizontally or vertically, depending on the fixture to which the sun visper is to be installed. After determining the position of the mounting bracket, use the bracket as a template to mark the position of the holes in the surface pre-drilled holes to insert the plastic anchor. 2. The bracket will be installed to solid wood, plastic anchor is not necessary to install. Plastic anchors are required for other media, such as concrete or stone. After drilling, insert the plastic anchor into the hole until it is level with the surface. Remove the four screws. Turn the clutch unit 90 degrees so that the clutch eye hangs from the top, the clutch eye hangs straight, and then turn the idle end unit so that the opening is facing away from the window. 3. The final step is to install bungee ropes and ring brackets strapped to the end of the shade. This is used to help tie the shade in windy weather. Mount the bracket in the side position. Make sure that each bracket is at least 6 feet from the top of the shade and can be reached by bungee rope.
