GODOX XPro-C E-TTL 2.4G Wireless High Speed Sync 1/8000s X System High-Speed Flash Trigger Compatible for Canon EOS Cameras

Pay with

GODOX XPro-C E-TTL 2.4G Wireless High Speed Sync Features

• XPro-C TTL Wireless Flash Trigger can not only control the flashes with built-in Godox Wireless X system e.g.camera flashes,outdoor flashes and studio flashes,but also can control the Canon original flashes when using in combination with X1R-C receiver

• This flash Trigger can be used on the following Canon EOS series camera models:1Dx mark II,1Dx,5Ds/5Dsr,5DIV,5D Mark III,5D Mark II,5D,7D Mark II 7D 6D 80D,70D,60D,50D,500D 450D,400D Digital,350D DIGITAL,100D,1200D,1000D,1100D,M5,M3

• Smart TCM Button: Long Press TCM Button can Transform the Flash Value in TTL Mode into the Power Output Value in M Mode; Short Press TCM Button Enables the Groups to be Switched Between the One-Group and Multi-Group Mode

• Fully Support TTL Autoflash, 1/8000s High-Speed Sync, Multi Flash, Manual Flash, Flash Exposure Compensation, TCM Transform Function, Magnfication Function, One-Shoot & Multi- Shoot Setting, Group Modeling Lamp Control, Group Zooming, Adjusting All Groups' Output Value Simultaneously, etc

• 16 Groups and 32 Channels to Wielessly Control and Trigger.Add 01 to 99 Wireless ID settings,Which Can Only Achieve Triggring When the channels and Wireless IDs of the Master and Slave Unit are Set to the Same,Avoiding Signal interference effectively

About GODOX XPro-C E-TTL 2.4G Wireless High Speed Sync

Specifications: Model: XPro-C Compatible cameras: Canon series cameras (E-TTL autoflash)Support for the cameras that have PC sync socket. Power supply: 2'AA batteries TTL autoflash: E-TTL Manual flash: Yes Stroboscopic flash: Yes High-speed sync : Yes Second-curtain sync: Yes Flash exposure compensation: Yes. 士3 stops in 1/3 stop increments Flash exposure lock: Yes Focus assist: Yes Modeling lamp: Control the modeling lamp by the flash trigger Beeper: Control the beeper by the flash trigger Wireless setting: The receiver end can control the camera shooting through the 2.5mm sync cord jack ZOOM setting: Adjust the ZOOM value by the transmitter TCM function: Transform the TTL shooting value into the output value in the M node Firmware upgrade: Upgrade through the Type-C USB port Memory function: Settings will be stored 2 seconds after last operation and recover after a restart Transmission range (approx.) : 0-100m Built-in wireless: 2.4G Modulation mode: MSK Channel: 32 Wireless ID: 01-99 Group: 16 Display:Large LCD panel, backlighting ON or OFF Dimension/Weight: 90x58x50mm/80g Package List: 1* Godox XPro-C Wireless Flash Trigger 1* LeaTure Key Ring