Pneumatic Male Straight 3/8 Inch Tube OD x 1/8" NPT Thread Push to Connect Fittings PC-3/8-N1 (Pack of 2)

Pay with

Pneumatic Male Straight 3/8 Inch Tube OD x 1/8" NPT Features

• Type: Male Straight; Size: 3/8" Tube OD x 1/8" NPT Thread Push to Connect Fittings.

• Material: Push-to-connect tube fittings are made of quality plastic and stainless steel for durable use.

• Applicable Tube: PU / PA / PE / PV

• Operating Pressure: 0- 150 PSI/ 0-9.9 kgf/cm2 (0-990kPa); Working Temperature: 0-60°C | 32～140°F; Negative Pressure: -100Kpa| -29.15 In H.

• Fluid Type: air, vacuum, water (no freezing). Easy to install and removed, offering good seal property.

About Pneumatic Male Straight 3/8 Inch Tube OD X 1/8" NPT

Directions for use! Do Not Exceed 145Psi Pressure. Working Temperature: 32～150°F, do Not Use Outside the Service Temperature Range to Prevent Deformation of the Sealing Material and Easy Leakage. Do Not Use in Places with Too Much Dust or Particles. Do Not Use Any Medium Other Than Air. the Product is Limited to Air or Vacuum Environment. After Completing the Connection, Please Gently Pull the Tube with Your Hand to Make Sure That It is Completely Connected Without Falling Off. Make Sure That the Cutting Surface of the Pipe is Vertical, There is No Scar on the Outer Circumference of the Pipe and the Pipe is Not Oval. Never Apply Tube Joint with Additional External Load(bending, twist, or Pulling), otherwise, Damage or Leakage Will occur. When Inserting the Pipe, It Must Be Inserted into the Bottom of the Joint. Failure to Insert the Pipe into the Bottom May Lead to Air Leakage.