Gas Gasoline Water Pump, Water Transfer Pump, High Pressure Water Pump, High Pressure Pump for Irrigation Pool, Portable Gas Engine High Pressure Water Pump (3 Inch 4-Stroke 210CC 7.5HP White)

Pay with

Gas Gasoline Water Pump, Water Transfer Pump, High Features

• 【High-quality Material】The pump is made of high-quality aluminum alloy and cast iron, which has excellent compression resistance and is not easy to rust and corrosion, so it can be beautiful and practical for a long time.

• 【High Working Efficiency】Powerful 210CC four-stroke motor with a power of 5.5kw and rotating speed of 3600rpm. 60m ³/ The maximum flow rate of h makes it faster and easier for you to pump and pour your work clothes. The pump adopts a 3inch large diameter water inlet and outlet, allowing large flow.

• 【Large Conveying Head】The maximum head of 91.86ft and the maximum suction of 26.25ft are enough to meet your needs. It can irrigate farmland, fish ponds and orchards for a long distance, saving the time and cost of manual transportation. This product is equipped with a fuel tank with a capacity of 3L/0.79 gallons, so you can use it for a longer time with only one refueling, and the work will not be interrupted.

• 【Good Heat Dissipation Effect】The product is equipped with multiple uniform heat dissipation holes, which can reduce the temperature in time during operation, reduce potential safety hazards, and extend the service life of the product. The base of the product is reinforced by a thickened full frame, which further ensures the stability of the product. At the same time, the off-ground design also ensures that the product will not be affected by moisture.

• 【Easy to Use】 When the product has sufficient oil, you can start it by hand without power supply or wire limit, which expands its working range. The 19.69*14.96*16.54inch compact structure and metal rod portable design make it easy to store. It can be used to immediately empty the pool, empty the flooded basement, pump out the flooded ditch, fill or empty the water storage tank or reservoir, irrigate the field, flush the construction site with hose, etc.

About Gas Gasoline Water Pump, Water Transfer Pump, High

Specification： Material: Aluminum Alloy and Cast Iron Color: Black+Red Engine Type: QS168F-1 Water Pump Inlet/Outlet: 3in Engine Type: 4-Stroke 210cc Max.Head: 28m/91.86ft Suction Head: 8m/26.25ft Flow: 60m³/h Horsepower: 7.5Hp Self-primintimes(s/4m):120 Rated Output Power:5.5KW Tank Capacity: 3L/0.79GAL Speed: 3600r/min Net Weight28.12kg(61.99lb) Product Size: 47*37*39cm/18.5*14.57*15.3in Package Size: 51*39*43cm/20*15.4*16.9in Package Included： 1*Water Transfer Pump 1*Intake Strainer 1*Hose Clamps 1*Spark Plug Wrench 1* Manual Notes： 1. Please note that the hose is not included in the package. 2. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before ordering. 3. Troubleshooting itemsThe pump can not pump water: the suction range of the pump is less than 7 meters to ensure that the water connection does not leak, the pump to add water (not self-priming pump), start the engine after the accelerator to wait patiently; Water inlet pipe because the suction of the pump is large, so there must be hardness, can not be dented;Pump leakage: excessive pressure leads to leakage of sealant pad, which can be sealed by winding raw material beltWater spraying in the pump seal: remove the four screws of the pump case, see the rubber seal ring inside, reinstall the pump case, tighten the screws.