All Categories
A: Sealing mode 1,Plug the power cord into the AC socket (110v). Place the opening part of the bag into the machine. 2, Close the lid of the product. Press the lid with your hand.( Or button buckle at both ends). Then Hold the "Seal" button for a few seconds. The green light turns red, it is working. Turn green again to indicate that it has completed. B: Vacuum + sealing mode. 1,Plug the power cord into the AC socket (110v). Place the opening part of the bag into the machine. 2, The top of the bag placed inside the black seal. 3, Close the lid of the product. Press the lid with your hand.( Or button buckle at both ends). 4, Press the green light, run the vacuum and seal TIP: Click the button is "Autorun", hold press the button is "Pause" 5, Lift the vacuum valve slightly. 6, Open the lid and remove the bag. TIP: this machine is only for dry or wettish products(just a little wet).Not applicable to liquid products Material: High-strength APS material. Voltage: 110v Vacuum strength:-40kpa~-68kpa TIP: Vacuum mode: A vacuum bag is required.(The kind of vacuum bag with bumps on one side of the bag--20pcs free vacuum bag in the package)