We specialize in hard to find items
All Categories
YOUSHARES Lead Free Solder Wire with Rosin Core (0.8mm, Sn99%-Ag0.3%-Cu0.7%, flux 2.0%), Net Weight 0.22lb for Most Electrical Repair Soldering Purpose
Share Tweet
*Price and Stocks may change without prior notice
*Packaging of actual item may differ from photo shown
- Electrical items MAY be 110 volts.
- 7 Day Return Policy
- All products are genuine and original
About YOUSHARES Lead Free Solder Wire With Rosin Core
YOUSHARES Lead Free and Rosin Core Solder Wire - Best Partner of Your Multipurpose Soldering Project · Specification: - Material Compositions: Sn 99%, Ag 0.3%, Cu 0.7%. - Melting Point: 217 ℃ (422.6 ℉). - Rosin Core: Flux 2.0%. - Elongation Rate: 58%. - Expansion Rate: 78%. - Solder Net Weight: 100 grams (0.22 lbs / 3.53 ounces). - Solder Wire Diameter: 0.8 mm (0.0315 inch). - Solder Wire Length: about 28.5 meters (93.5 feet). · Package: 1x YOUSHARES Solder Wire Spool · Soldering Tips: 1. Heat up the soldering iron. 2. After soldering iron is fully heated, use a wet sponge to softly scrape the tip to remove old solder. 3. Wait seconds to heat and dry the iron, carefully apply a small amount of fresh solder and coat the tip for pre-soldering before start. 4. When soldering two components together, place the soldering iron on the part where you want to touch, hold it there for a second. 5. Slide the solder underneath the tip of the iron, sandwiching it to the joining part, and hold it for another second or two, feeding in enough solder you need. 6. Pull away the solder first, and continue holding the iron for another second to let the solder forming a good joint. 7. Remove the iron, wait a few seconds and let the solder natural cooling. A good soldering done.
