We specialize in hard to find items
All Categories
Younik 2-Pack 3D Replacement Joystick Analog Thumb Stick for Nintendo Switch Joy-Con Controller-with 4 Thumbstick Caps,Tri-Wing & Cross Screwdriver and Fixing Tool
Share Tweet
*Price and Stocks may change without prior notice
*Packaging of actual item may differ from photo shown
- Electrical items MAY be 110 volts.
- 7 Day Return Policy
- All products are genuine and original
About Younik 2-Pack 3D Replacement Joystick Analog Thumb
Installation InstructionLeft side instruction(Similar operation on the right)1. Take out the Tri-Wing screwdriver and remove 4 screws from the handle shell.2. Use the prybar to slowly pry open the shell along the gap and gently open the shell.3. Pull out the battery with the pry bar(Note: One end of the battery is connected to the wire)4. Use the cross screwdriver to remove 5 screws (two types of screws).5. Slowly remove the middle compartment, open the cable valve in the middle compartment, and take out the cable with tweezers.6. Open the two cable valves next to the joystick, then take out the cable, and use the Cross screwdriver to remove two screws on the joystick.7. Remove the old joystick and replace the new joystick. Screw back the two screws on the joystick, insert the cable with the tweezers, and close the cable valve.8. Connect the cable of the compartment with tweezers, close the cable valve, cover the middle compartment and screw back the screw.9. Close the back cover and screw back the screws.Note: 1. The housing screw is Y-shape, the internal is screw cross, with the corresponding screwdriver.2. Do not mess different screws when they are installed back.3. Please turn the screws precisely and carefully in case of grinding the screws.4. Original housing screws are easy to be damaged, and new screws can be replaced if needed.5. When disassembling the internal cable, pay attention to the switch status of the cable valve.6. The battery has wire, avoid tearing wire during installation.Package Includes: 2 x Replacement Joystick for NS Joy-Con1 x "Y" Tri-wing Screwdriver1 x "+" Cross Screwdriver1 x Tweezers1 x Pry Tools4 x Handle Caps6 x Screws (4 housing screws, 2 internal screws)Specifications: Material: ABS, PC
