Westinghouse 4 Bay Smart Universal Battery Charger for IMR Li-ion IFR LiFePO4 Ni-MH Rechargeable Batteries- AA AAA C SC RCR123A 18650 18500 14500 14430 17335 14335 26650

Pay with

About Westinghouse 4 Bay Smart Universal Battery Charger

(1) Selecting Battery Type and Charging: 1. Connect the battery to powered USB port with the included Micro USB cable. 2. Check battery type and insert it into a charging channel according to the polarity. 3. IF the battery is 1.2V (Ni-MH/Ni-Cd) or 3.7V(li-ion) the corresponding LED will flash for 5 seconds and then changes to charging mode, the LED indicator shows the charging status. 4. If the battery is 3.2V LiFeP04 or the 3.85V Li-ion LED will flash. Press the ”MODE” button on the charger to select battery type with in the first five seconds. After selection, the charger will change to charging mode automatically and the LED indicator will show the charging status(2) Selecting Charging Current: The default charging current is 500mA. You can change the charging current anytime during the charging process by pressing & holding the"MODE" button for 3 seconds. The charging currents should differ depending on the number of batteries being charged. Use the selections as a guide 1 PCS: 2000mA / 1000mA/700mA/500mA2 PCS: 1000mA/700mA/500mA3 PCS: 700mA/500mA4 PCS: 500m (3) Using the Charger as Mobile Power Insert a Li-ion battery on the right most channel of the chargerConnect the USB cable to the output port of the charger and connect the other end of the USB to your device When the charging is done, disconnect the USB cable and remove the Li-ion battery from the right most channel. When charging batteries with larger diameter, please use the first or forth channel of the charger.(4) LED Indicator When the charger is connected to powered USB, all LEDs will light up immediately, and then:if no battery inserted, only the 500mA LED light will be on and others will go out if a battery is connected, please refer to (1) &a