All Categories
welcome raw, unfinished steel script sign This beautiful bare metal sign is ready to paint! 17x5" in size. This word art is cut from steel about as thick as a nickel -- lightweight enough to hang on your walls but heavy enough for a project. We have not drilled holes or attached any hanging hardware so that you can finish this item however you prefer! This do-it-yourself raw steel sign is coated with an oily film to prevent rust during transit. While we use brand new steel and use rust preventative measures on the mild steel, your raw steel sign can develop slight surface rusting during shipment to your location. This is most likely during transits in high humidity and/or the package being delivered in the rain. Any light surface rust is easily removed by lightly sanding or scuffing with a scotch brite pad before painting or display. We recommend lacquer based paint thinner, acetone, automotive brake cleaner or solvent based wax & grease remover to clean the oily film off of the sign before painting. Sanding with a 220 grit or finer sand paper or using a scotch brite pad to scuff the surface of the metal will greatly enhance paint adhesion. Spray paint with primer is an easy coating for this type of sign. We do not recommend water-based paint on raw steel products as it can cause rust instead of preventing it. Always paint the back side first, so that the front will not be placed down after painting. Signs can be hung with commercial grade double-sided tape, construction adhesive, Command strips, or you can use small finish nails through the openings in letters. We hope to provide you with a great starter piece for a fun project! Check out youtube.com for inspiration on custom paint projects! Please note that this is not a finished sign. With time and exposure to moisture the sign will rust if not painted.