VEVOR Laser Power Supply 60W Co2 Laser Engraver Power Supply 220V Laser Tube Power Supply for Laser Cutter Engraving Machine(60W)

Pay with

About VEVOR Laser Power Supply 60W Co2 Laser Engraver

Laser Power Supply The CO2 laser power supply is small in size, light in weight, easy to operate, and has good matching performance with the laser tube, which can be directly connected to the laser tube. Fast response speed, good effect, high performance, high cutting power, and can extend the life of the laser tube. High PerformanceFast response speed, good effect, high performance, high cutting power, and it can extend the life of the laser tube. Easy ControlLaser power supply machine start and stop can be easily controlled by TTL level. Simple Laser Power ControlTwo methods to adjust laser power: Input 0V to 5V analog sighnal, can also input PWN signal. Mark ClearlyEach data is clearly marked for your convenience.Power detection instructions: When the power supply is in standby state, press the test switch. if the L light is on and the P light is on, laser tube does not output laser, the laser tube is broken. If the laser tube outputs laser, the laser power is normal; if the LASER lamp is off, the laser power is bad. Protection FunctionOpen circuit protection function, it can be used to detect the presence or absence of waterway, protect the laser; It can better protect the laser power and prolong the service life. Good CompatibilityCo2 laser engraver power supply is suitable for a variety of CO2 laser tubes. Specification: Input voltage: AC110V / AC220V Maximum output voltage: 24KV Maximum output current: 25mA Efficiency: 91% Response speed: ≤1ms Cooling method: fan cooling Gross Weight:2.3kg/5.09lbs Package Size: 27x20x14cm/10.62x7.87x5.51inch Package Content: 1 x high voltage connector 1 x laser power supply