VanTop V9H Dash Cam Hardwire Kit, 11.5ft Mini USB Hard Wire Kit for Dashcam Converts 12V-24V to 5V/2.5A w/Fuse Kit and Installation Tool, Low Voltage Protection for Dash Cameras

Pay with

About VanTop V9H Dash Cam Hardwire Kit, 11.5ft Mini USB

VanTop V9H Dash Cam Hardwire Kit Specification Input Voltage: DC12V/24V Output Voltage: 5V-2.5A Max Working Temperature: -40~160°F Over-current Protection: 2.5A Low Voltage Protection: 11.6V±0.2/23.5V±0.2 Connector Type: Mini USB Cable Length: 3.5M/11.5FT Package List 1 x Hardwire Kit 4 x Fuse Tap 4 x Blade Fuse 1 x Easy Pry Tool 1 x Quick Guide TIPS 1)We strongly recommend the professional installation of the Hardwire Kit. 2)Please make sure the ignition is off before installing the Hardwire Kit. 3)Carefully utilize the tool to test and check the polarity and grounding before confirming the installation. 4)For safety reasons, we strongly recommend that you do not use any fuse slot used by any of your vehicle's critical components, such as the Air Bags. Installation Steps Step 1: Connect the Yellow Wire of the Hardwire Kit with one type of Fuse Taps that your vehicle requires. Step 2: Connect the Fuse Tap to the positive terminal of your Constant Fuse Slot. Step 3: Connect the Red Wire of the Hardwire Kit to the positive terminal of the ACC Fuse Slot in the Fuse Box. ACC Fuse Slot only has power when the ignition is on. Step 4: Crimp the Black Wire and screw it down to any non-costed metal bolt/screw in your vehicle to ground it. Step 5: Connect the Mini USB connector of the Hardwire Kit to the Mini USB input of your Dash Camera, and then the installation is completed.