All Categories
For outdoor/indoor applications. Excellent for Wi-Fi hotspots, kiosks, M2M, IoT, telemetry and vehicle applications. Connect this antenna to existing Wi-Fi routers, access points or other Wi-Fi enabled devices which have reverse polarity SMA external antenna connectors. This low profile (~ 3 inches tall) fixed mount omni-directional antenna provides 3 to 5 dBi of gain and supports both the 802.11 b/g/n 2.4 GHz and 802.11 a/ac 5.8 GHz frequency bands. Permanently mounts via a 5/8 in. (16 mm) hole with locking internal nut. Resists vandalism with no exposed coax cable, high impact ABS radome shell and an extra thick threaded screw mounting post. Includes 10 ft of low-loss RG58U coax fed through center mounting post. Includes "L" bracket for optional wall mounting. Ideal for use in vending machines, meter housings, equipment sheds, or other locations requiring a low-profile vandal resistant external antenna. Also suitable for vehicle mounting on buses, vans, trucks or other mobile installations. Completely waterproof (IP67) when installed with post extending into a water-tight enclosure. Not waterproof when used exclusively with wall bracket. Integrated RPSMA male plug connector mates with female jack found on most Wi-Fi access points and routers. * For optimum performance this antenna should be mounted on a flat, horizontal metal surface at least 8 inches in diameter. Specifications Frequency Range: 2400-2483 / 5150-5250 / 5725-5850 MHz (802.11 a, b, g, n, ac) Impedance: 50 ohm VSWR: < 2.0:1 Gain: 3-5 dBi Radiation: Omni Polarization: Vertical Connector: RPSMA plug (male) Material: ABS plastic (black) Connector: Brass with Nickel plating Cable Length: 10 ft (3m) low-loss RG58U coax Height: 3.2 in (82 mm) Diameter: 1.9 in (48 mm) Weight: 6.2 oz (176 g) Op. Temp.: -40C to +70 Note: MIMO systems should have identical antennas on all connectors for best results.