We specialize in hard to find items
All Categories
UCTRONICS ESP8266 Weather Station IoT Starter Kit for Arduino IDE with ESP8266 ESP-12E Development Board 0.96" OLED Display and DHT11 Temperature and Humidity Sensor
Share Tweet
*Price and Stocks may change without prior notice
*Packaging of actual item may differ from photo shown
- Electrical items MAY be 110 volts.
- 7 Day Return Policy
- All products are genuine and original
About UCTRONICS ESP8266 Weather Station IoT Starter Kit
Name: UCTRONICS ESP8266 Weather Station IoT Starter Kit Specification: ESP8266 ESP-12E Development Board 802.11 b/g/n protocol Wi-Fi Direct (P2P), soft-AP Integrated TCP/IP protocol stack Integrated TR switch, balun, LNA, power amplifier and matching network Integrated PLL, regulators, and power management units +19.5dBm output power in 802.11b mode Integrated temperature sensor Supports antenna diversity Power down leakage current of < 10uA Integrated low power 32-bit CPU could be used as application processor SDIO 2.0, SPI, UART STBC, 1x1 MIMO, 2x1 MIMO A-MPDU & A-MSDU aggregation & 0.4 s guard interval Wake up and transmit packets in < 2ms Standby power consumption of < 1.0mW (DTIM3) 0.96" 128x64 pixel OLED display Size: 0.96'' Resolution: 128X64 Supported platforms: for Arduino, ESP series, 51 series, MSP430 series, STIM32 / 2, SCR chips Driver IC: SSD1306 Communication: IIC VCC: 3.3~5V GND: Ground SCL: Serial Clock SDA: Serial Data DHT11 Temperature and Humidity Sensor Digital signal output VCC: 3.3V~5V GND: Ground DATA: MCU IO port Tips: Do not reverse the VCC and GND, otherwise it will burn! Package including: 1pcs ESP8266 ESP-12E Development Board 1pcs 0.96" OLED display 1pcs DHT11 Temperature and Humidity Sensor 1pcs 40x10cm female-female jumpers 1pcs USB cableNote:For the free weather API restriction issue, we have updated the user manual online, contact us for the newer version.
