All Categories
Portable and Convenient The tyre inflator pump is portable. Low-voltage and fast filling. It cannot only be used for any automobile tyres inflating. But also applies to motorboat,motorcycle,bicycle and other tourism entertainment products such as balls etc. Then product is small, portable and easy to operate, filling air in tyres fast and meets the requirement of many different models of cars. Specification Rating power: 120W Maximum pressure: ≥90psi Hose length:500±20mm Ambient Temp:-20℃~+60℃ Product size:165x170x63mm Rating voltage: DC-12V Max.Current: 10A Cable length: 3000±100mm The gauge accuracy: 220±15kPa Net weight: 0.75kg Filling time: Filling the 195/65R15 Tire from 0 to 35pasi,the filling time is 4 minutes 48 seconds Operating Instruction 1.Start the car engine before using. 2.Insert the plug of the compressor into the car socket(Cigarette Lighter Socket) 3.Connect the nozzle of the compressor to the nozzle of the tyre. Be cautious that the fitting is tight enough. 4.Open the power off and take-out the nozzle from the tyre and store away to use again next time. 5.3 ways of using the LED light. Press the light button to change them one by one to these modes. Warm Tip 1.Please don't use the Air Compressor if anything appears abnormal. 2.Confirm the correct tyre pressure maximum and recommended values for your car that us required before inflating(consult your car manual for verification). 3.To keep the air flow un-interrupted, don't bend the hose during usage. 4.In order to ensure the battery has enough power, please do not turn off car engine during use. 5.Please do not sustain the working time over 30 minutes at one time. If it has been in use for over 30 minutes, please shutdown the compressor and allow it to cool for 20 minutes before re-using.