We specialize in hard to find items
All Categories
TENFUN Scissor Jack 1.5 Ton(3,307 lbs) Car Jack with The Saving Strength Ratcheting Handle
Share Tweet
*Price and Stocks may change without prior notice
*Packaging of actual item may differ from photo shown
- Electrical items MAY be 110 volts.
- 7 Day Return Policy
- All products are genuine and original
- Cash On Delivery/Cash Upon Pickup Available
About TENFUN Scissor Jack 1.5 Ton(3,307 Lbs) Car Jack
Instructions and Cautions 1. Check and confirm the bearing capacity and working stroke height of the jack, which shall not exceed its rated load when used. 2. Before lifting, stop the vehicle on the level and hard road (the maximum slope shall not be greater than 6°), and the vehicle will stop. 3. Put the manual gear into the first gear or reverse gear, and put the automatic gear into the P gear, and pull on the parking brake of the hand brake. 4. After confirming that the wheel on the diagonal of the removed tire is effectively blocked, loosen the nut of the wheel to be replaced, but do not screw the nut off at this time. 5. Place the jack under the jacking position specified by the automobile factory, and use the handle to shake the jack to a proper height. 6. Shake the handle to raise the vehicle to a proper height, screw off the wheel nut and replace the tire. 7. After changing the tire, screw on all the fixing nuts of the tire by hand. Do not lock the fixing nuts of the tire by force. First lower the jack, take out the jack, and then use the tyre changing wrench hand lock the tire retaining nuts. 8. When the jack supports the vehicle, it is forbidden to place any part of the body under the vehicle. 9. The jack is only applicable to the use of vehicle tire replacement, but it cannot be used to support the vehicle for a long time. Only one wheel can be lifted at a time.
