We specialize in hard to find items
(1)
Stud Finder Wall Scanner 5 in 1 Electronic Stud Sensor Beam Finder for Wall Detector Magnetic Stud Finder with HD LCD Dislay Audio Alarm for Wood AC Wire Metal Studs Detection
Share Tweet
*Price and Stocks may change without prior notice
*Packaging of actual item may differ from photo shown
- Electrical items MAY be 110 volts.
- 7 Day Return Policy
- All products are genuine and original
About Stud Finder Wall Scanner 5 In 1 Electronic Stud
Stud finder 5 in 1 wall scanner for find the wall wood, metal and AC wires hidden 5 in 1 Stud finder features five scanning mades; · Stud ½ in. scan: Locates the center and edges of wood and metal studs up to ½ in. (13 mm ) deep · Stud 1 in. scan: Locates the center and edges of wood and metal studs up to 1 in. (25 mm ) deep · Stud 1 ½ in. scan: Locates the center and edges of wood and metal studs up to 1 ½ in. (38 mm ) deep · Metal Scan: detects metal up to 2.36 in. (60 mm) deep · AC Scan: Detects live unshielded AC wires up to 2 in. (51 mm) deep Calibrations: Stud finder can be calibrated anywhere on the wall. Place Stud finder against the wall, press the power button, Press the mode switch button to the mode selected. Press the Scan button to start calibration, the signal bar disappear and hear the beep and the calibration is completed. Start scanning again 2-3 s after successful calibration. Use: Slowly slide tool across surface. Arrow and EDGE indication will illuminate, indicating location of the stud edge. When the center of the stud is found, the full bar, arrow, and center indication are shown on the lcd display, and the buzzer sounds. AC Wire Warning: AC Wire Warning detection feature works continuously in anything Scan modes. When live AV voltage is detected, the AC warning indicator illuminate and protect your safety. Note: Scan for metal: First scan 1 in scan mode (or Stud ½ in. Stud 1 ½ in.), find the location, pick up the stud finder, in the air, press the mode switch button to switch to metal mode, then repeat the previous to determine the location of metal objects faster. If there is a live wire on the wall, turn off the power. When scanning a ceiling or wall with an uneven surface, place thin cardboard on the surface to be scanned and scan over the.
