Stick On Tiles for Backsplash Kitchen | Self-Stick Backsplash Tiles | Peel and Stick, Self Adhesive, Removable Backsplash Wall Tile Stickers - 10" x 10.5" (10-Pack)

Pay with

About Stick On Tiles For Backsplash Kitchen | Self-Stick

UPDATED INSTALLATION GUIDEThere is NO MORE NEED to cut out the "Overlap Tabs"Thanks to your great comments and communication with us, we've created this QUICKER & EASIER INSTALLATION GUIDE.Please disregard instructions on our packaging, and USE the FOLLOWING STEPS. Our updated packaging is coming soon... SUITABLE SURFACES - Glass / Acrylic / Ceramic / Melamine / Flat Panel Dry Wall / Water Proof SurfacesNOT SUITABLE SURFACES - Rugged Wall / Un-flat Wall / Oiled Wall / Unclean Wall / Moldy Wall / Cracked Wall / Freshly Painted Wall / Showers / Bathtubs* Please wear a pair of gloves during installation. The glue on the backing of the tile is intended for permanent use, and is very sticky *1. Please refer to "Suitable Application Surfaces" listed above to ensure that they are the right fit for your project. Installing surface must be cleaned and completely dry.2. Using a level and a pencil, draw a top horizontal guideline for your tiles to ensure that your project comes out properly aligned.3. Cut out the inter-locking grooves of your first tile. (Opposite side from the "overlap tabs")4. Peel off the backing and apply your first tile with the side that you just cut facing OUTWARD. Align the tile to your guideline prior to installing it as it cannot be adjusted after it is stuck on the surface.5. Remove the plastic film on the face of the tile.6. No cutting is required for your consecutive tiles. Install them inter-locking the grooves to the "overlap tabs".7. Allow 24 hours to cure.Tip:- Apply your first tile on the top right (or top left) corner to make it easier.- Install the tiles in horizontal layers, working your way from the top layer to the bottom.- The last tile for each layer should be cut to size prior to installation for your ease. (Same goes for all tiles on the bottom horizontal layer)- Firmly press on the tiles prevent them from lifting over time.