All Categories
Details: Brand introduction: SPOTACT is an old Chinese brand engaged in R&D, manufacturing and sales of hardware. It has many years of experience in lock hardware , bathroom hardware and door hardware. Specification: Panel material: zinc alloy. Lock body material: stainless steel. Lock core material: copper. Panel color: silver. Applicable door thickness: 30-65MM. Panel size: 42*142*60MM. Lock body size: center distance 60MM. Liner size: 27*67MM. Lock rod thickness 2 (mm). Lock lever spacing 60 (mm). Net weight: about 1.4kg. Applicable type: indoor / outdoor door. Installation step operation: 1. After punching the hole position according to the hole drawing, put the lock tongue into the hole and screw. (note the crossbar red flat mouth down). 2. Set the password to the panel, replace the handle direction, and put it into the shaft. 3. Cut the fixing screw into the length of the door thickness. The outer panel is placed on the shaft of the spring surface, and the inner panel is placed and tightened. Password setting: 1. Use "L" type accessories. 2. Turn the red dot switch to the "OFF" state. After the setting is completed, return to the "ON" state and the password will take effect. 3. Twist the button to the left (180 degrees) to set the password, and turn it to the right to cancel the password. Rotary shaft installation: One end of the shaft with the spring is mounted on the code face (outdoor). The shaft must be implanted in the end. If the key can be rotated 360 degrees, it means that it is not installed correctly. The correct key turns around 90 degrees to drive the shaft. Package Included: 1* front panel. 1* rear panel 1* lock tongue 2* door plate 2* protective pad 2* key 9* screw fittings 1* manual (English) 1* packaging