We specialize in hard to find items
All Categories
Sparkmaker High-Resolution 3D Printer 1st Version, Mini Desktop Resin Sla Printer, One-Key Printing 3D Printer-3.85" x 2.16" x 4.92" Print Area
Share Tweet
*Price and Stocks may change without prior notice
*Packaging of actual item may differ from photo shown
- Electrical items MAY be 110 volts.
- 7 Day Return Policy
- All products are genuine and original
About Sparkmaker High-Resolution 3D Printer 1st
How to use Sparkmaker: Step1:Add model to SparkStudio to add support and slice Step2:Save the slice file to SD card. Step3:Level platform when first print (No need to level again next time). Step4:Loosen the four screws on both sides of the platform. Step5:Rotate the knob drops the platform to the lowest point Step6:Press down the platform and tighten the four screws on both sides of the platform. Step7:Pour the resin into resin tank(Less than 120g resin) Step8:Insert the SD card into the slot (Face down). Step9:Press the button and start to print Step10:The print is finished. Step11:Loosen the handle and remove the platform Step12:Remove the supports of model Step13:Clean the model with 99% alcohol Step14:Irradiate the model with UV-light about 2-3mins.（purchased separately） Step15:Finally,get the model. How to Clean the Machine? The edge of the building platform can be cleaned using tissue or dust cloth and residual adhesive can be removed with a knife or spade and the residual adhesive in the tank should be removed with tweezers. The remaining resin can be absorbed using a syringe and stored in a bottle for next use. Loosen the two screws used to install resin tank and clean the tank with alcohol, and then reinstall it. Matters needing attention: 1.※When connecting the printer,You should plug in the DC port first,and then plug in the socket. 2.The SparkMaker 3D Printer should put in a place without strong light. 3.UV cover should be put on the SparkMaker Printer when printing. 4.The SD card's capacity should not more than 32G and should be formatting when first use. 5.Avoid looking at UV light and you should wear goggles. KINDLY REFER USER MANUAL BEFORE USE.
