We specialize in hard to find items
All Categories
Sopoby 150PCS Solder Seal Butt Connectors Kit, Self-Solder Heat Shrink Wire Connectors, Waterproof Insulated Electrical Butt Splice for Automotive Boat Truck Wire Joint(7 Colors/7 Sizes)
Share Tweet
*Price and Stocks may change without prior notice
*Packaging of actual item may differ from photo shown
- Electrical items MAY be 110 volts.
- 7 Day Return Policy
- All products are genuine and original
About Sopoby 150PCS Solder Seal Butt Connectors
Sopoby 150PCS Solder Seal Heat Shrink Butt Wire Connectors SPECIFICATIONS: Color: White, Red, Green, Blue, Purple, Yellow, Orange Sizes: 5 x Orange Connectors: Diameter 7.0 mm, Cable cross-section: 10 mm²(A.W.G.: 8) 5 × Yellow Connectors: Diameter 6.0 mm, Cable cross-section: 4.0-6.0 mm²(A.W.G: 12-10) 20 × Purple Connectors: Diameter 5.4 mm, Cable cross-section: 2.5-4.0 mm²(A.W.G: 14-12) 30 × Blue Connectors: Diameter 4.5mm, Cable cross-section: 1.5-2.5 mm²(A.W.G: 16-14) 30 × Green Connectors: Diameter 3.4 mm, Cable cross-section: 0.75-1.5 mm²(A.W.G: 18-16) 40 × Red Connectors: Diameter 2.7 mm, Cable cross-section: 0.5-1.0 mm²(A.W.G: 22-18) 20 × White Connectors: Diameter 1.7 mm, Cable cross-section: 0.25-0.34 mm²(A.W.G: 26-24) FEATURES: ▶Waterproof Seal - Dual-Walled tubing ensures waterproof seal and prevents wire corrosion. Hot melt adhesive & solder inside, sealed with advanced waterproof function. ▶Fast & Easy Operation - Just strip your wires, insert them into the connector and apply heat. Transparent sleeve provides precise inspection, easy control soldering process. ▶No Slip Wire Contact - Tubing reduces in size and solder will melt and flow through the stripped wires, ensure strong holding, avoids wires slipping out from the terminal. ▶Great wiring solution for hard to reach or limited space areas. Make properly soldered and waterproof connections in less than 30 seconds. USING INSTRUCTIONS: ① Strip wire insulation 1/3 inch on both wire ends. Insert into the solder sleeve and twist the wire strands together. ② Continuously rotate the connector when using a heat gun to apply heat evenly around the solder until it flows into the wire strands. ③ Then apply heat to the two ends of the tubing until the adhesive flows and seals the wires. ④ Remove the heat and let it cool down for use.
