We specialize in hard to find items
All Categories
SKF FY 2.7/16 TF Ball Bearing Flange Unit, 4 Bolts, Setscrew Locking, Regreasable, Contact and Flinger Seal, Cast Iron, Inch, 2-7/16" Bore, 5-5/8" Bolt Hole Spacing Width, 9110lbf Dynamic Load Capacity
Share Tweet
*Price and Stocks may change without prior notice
*Packaging of actual item may differ from photo shown
- Electrical items MAY be 110 volts.
- 7 Day Return Policy
- All products are genuine and original
About SKF FY 2.7/16 TF Ball Bearing Flange Unit, 4
This SKF FY-TF series ball bearing flange unit has a cast iron housing with four bolt holes, contact and flinger seals, and set screw lock. It is designed for mounting onto bearing surfaces perpendicular to the shaft axis. The housing is made of gray cast iron for rigidity and vibration damping, and is equipped with a grease fitting on the outer surface for reapplying lubricant. The SKF YAR 2-2F series single-row, deep-groove ball bearing insert in the housing accepts radial, thrust, and combined loads and has a wide, extended inner ring on both sides for increased shaft support and reduced inner-ring tilt for smooth operation. Its inner and outer rings and balls are made of high-grade carbon-chromium steel for durability and resistance to deformity. This self-aligning bearing has a convex sphered outer surface that compensates for misalignments. Steel-reinforced molded rubber lip seals on both sides of the bearing retain lubricant applied at manufacture and help keep contaminants out. For added protection, flingers on the inner ring deflect contaminants away from the seals. The bearing locks onto the shaft with two set screws spaced 120 degrees apart for a three-point contact hold. This lock type minimizes ring distortion and vibration and is suitable for low to moderate speed applications where the shaft rotates in a single or reversing direction. Flanged bearing units are suitable for use in industrial and commercial applications including conveyors, fans and blowers, construction machinery, and processing equipment, among many others. Mounted bearings combine a bearing mounted inside a housing unit. The bearing housing replaces the need for a casting or weldment to position the bearing securely for reliable operation, and its design determines the type of insert bearing. Insert bearings use rolling elements (ball, cylindrical, spherical, barrel, needle, spindled, or tapered) to maintain the separation between moving parts to reduce rotational friction, and to support radial and axial loads. Available in a variety of materials and mounting configurations, mounted bearings can be one- or two-piece, they can have an extended inner ring and locking device, and they can have seals and end caps that retain lubrication and protect the working parts of the bearing from environmental debris. Mounted bearings support shafts in a variety of mounting configurations (flange block, hanger, pillow block, and take-up block), and are used in a range of applications from light duty shaft guidance on conveyors to road building equipment and crushers. SKF manufactures bearings, seals, and lubrication systems for automotive, OEM, energy, and other and industrial applications. The company, founded in 1907, is headquartered in Gothenburg, Sweden, and meets International Organization for Standardization (ISO) TS 16949 and 9001 standards for quality assurance.
