We specialize in hard to find items
(1)
SHINA SK-66 CNC Automatic Tool Touch Sensor Normally Closed with Blowing Setting Gauge Z-Axis Presetter Locator with Stroke 5mm for Mach3 etc
Share Tweet
*Price and Stocks may change without prior notice
*Packaging of actual item may differ from photo shown
- Electrical items MAY be 110 volts.
- 7 Day Return Policy
- All products are genuine and original
About SHINA SK-66 CNC Automatic Tool Touch Sensor
Feature: Output mode:NC(normally closed) Pre trip:Almost 0 Stroke:5mm Repeat positioning accuracy:0.001mm(operation speed:50-200mm/min) Life:3000000 times. Contact force:1.5N Outer shell:Grinding 4S. Protection:IP67. Cutter head:Diameter 20mm, hard carbide. Shock rating:20mA(MAX) DC24V recommended value(10mA)resistive load Cable:3M 4-cell tensile strength 30N Minimum bending radius R7 Protection Tube:1M (Minimum bending radius R25) Ultra travel alarm: Exceed the specifications:NC(Normally closed),distance signal about 5mm Shock rating:DC24V 20mA(MAX) 10mA(Resistive load). Installation Instructions: 1. The tool and make sure the contact surface on the knife perpendicular, and vertically downward into contact with the contact surface, please try to install the relatively small iron bench in place 2. Be sure to use within the rated power range, please control voltage DC5-24V, the current below 20mA, the use of ambient temperature range -25oC ~ 70oC. 3. Please knife tool diameter 20mm diameter or less control of the cutting speed please controlled 50-200mm / min, the tool center to fall on the flank of the center. 4. When use of blowing function, the outer diameter of tube diameter 6mm, inner diameter of diameter 4mm. Note that cleaning the contact surface attached to the iron and cutting oil. Package Include: 1 x Normally closed with stroke protection and blowing.
