All Categories
Description: Weight: 1.65lb Material: Silicone Color: grey Size: 15.8x15.8x0.5IN USB cable length: 40IN Operation Manual: 1. Remove the cushion. 2. Place the product flat with the back facing upward, then pour 100 ml of water (tap water, mineral water) slowly from the feeder into the cup. 3. After adding water, horizontal stillness above 10s, so that water can be better absorbed in the special porous materials. If excessive water is added, the product can be suspended vertically for more than one minute to remove excess water in order to prevent damage to the product. 4. If you use the cushion on the vehicle, please choose the power interface according to the position, and connect the two ends of the wire control with the cushion and the power respectively. 5. Press down the wire control switch and the indicator lights on that it will start to work. 6. If it feels cold, press the off wire switching power supply again, the indicator lights go out and stop working. Maintenance Mode: 1. Cleaning: In order to keep the cushion clean, wash the cushion regularly. Soak the cushion body in water and shake it gently so that the dust in the cushion interlayer is washed out along the water flow. After wiping the cushion surface with clean wet cloth, place the cushion vertically in the ventilated air to dry. Do not touch any chemical supplies during the cleaning process. 2. Storage: If it is not used for a long time, please remove the excess water in the cushion (start-up operation 12 hours shutdown) and put it in a cool and ventilated place after pulling out the power supply.Included: 1 X Car Seat Cover Cushion 1 X USB Cable 1 X Measuring Cup 1 X Dustproof Bag