We specialize in hard to find items
All Categories
QWinOut 2.4G SP09X Micro DSM/2 DSM/X Satellite Receiver Serial Port for Naze32 F3 Mini RC Drone
Share Tweet
*Price and Stocks may change without prior notice
*Packaging of actual item may differ from photo shown
- Electrical items MAY be 110 volts.
- 7 Day Return Policy
- All products are genuine and original
About QWinOut 2.4G SP09X Micro DSM/2 DSM/X Satellite
Specification: -Item Name: 2.4G SP09X micro DSM/2 DSM/X Satellite receiver -Frequency range: 2.403-2.479Ghz -Input power: 5V -Response time: 22ms / 11ms -Resolution: 1024/2048 -Display method: LED -Operating voltage: 3.3V -Working current: 60MA -Size: 18mm*13mm*5mm -Weight: 0.9 g -Antenna length: 30mm -Data format: Serial port -Protocol: DSM2/DSMX -Distance: no ground interference (1 m from the ground ) > 200m -Uses: Micro indoor/outdoor small aircraft./multi rotor -Compatible Transmitters: DSM2 / DSMX series of remote control Bind procedure With F3 flight controller: -Connect Flight controller to computer and open Cleanflight configurator From CLI tab type: "set spektrum_sat_bind = 9" for DSMX or "set spektrum_sat_bind = 5" for DSM2 -Type "save" and after Flight controller reboot remove USB cable (=Power off the board) -Wait a second and reconnect the USB cable. After cold start satellite led(Orange color LED) should start blinking and transmitter should be turned on while pressing the bind button -After binding satellite led should be solid. Connect Betaflight and use receiver tab to test that satellite is working correctly. -Final step is to go to CLI tab and type "set spektrum_sat_bind = 0" and then type "save". This must be done so that satellite doesn't go back to binding mode when the Flight controller is repowered again.
