We specialize in hard to find items
(1)
QTlier iPhone 6s Screen Replacement 4.7" White,LCD Display & Touch Screen Digitizer with 3D Touch Frame Assembly Set for iPhone 6s 4.7 inch with Repair Tool kit
Share Tweet
*Price and Stocks may change without prior notice
*Packaging of actual item may differ from photo shown
- Electrical items MAY be 110 volts.
- 7 Day Return Policy
- All products are genuine and original
About QTlier IPhone 6s Screen Replacement 4.7" White,LCD
Color: White 1. ONLY fits for iPhone 6s. 2. Tested one by one before shipping, 100% working, good quality replacement with 3D touch for your broken or non-functioned screen. 3. Professional installation is highly recommended, or you can install it by watching videos on YouTube. 4. Install it again if it is not working. If it still doesn't work, contact me please. Attention Please Refer to the installation tutorial on Youtube (Related Video Shorts) Test the screen by inserting the flex to the main board before installation; be sure you feel a gentle snap. If not, try again. Confirm the phone is power off before installation. Do not press the left and upper corners of the screen, otherwise may cause lines on the screen. Each screw should be installed into original location, because they are not same length! Never tighten screw over limit! Treat flex cables gently, use tools instead of your finger during installation , otherwise the screen will damage! If you meet with these issues Cannot turn on, touch insensitive, flash, lines on screen, ghost click etc. Please try this: Power off your phone, disconnect all the cables including the battery cable, clean the connector on the motherboard, reconnect the cables, leave the phone alone for a while in a dry environment, a hard reset of your phone power on.
